Nexperia
74AVC9112
1-to-4 fan-out buffer
8 Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
V
CC
supply voltage -0.5 +4.6 V
V
I
input voltage
[1]
-0.5 +4.6 V
OE = LOW
[1]
[2]
-0.5 V
CC
+ 0.5 VV
O
output voltage
OE = HIGH
[1]
-0.5 +4.6 V
I
IK
input clamping current V
I
< 0 V -50 - mA
I
OK
output clamping current V
O
< 0 V -50 - mA
I
O
output current V
O
= 0 V to V
CC
- ±50 mA
I
CC
supply current - 100 mA
I
GND
ground current -100 - mA
T
stg
storage temperature -65 +150 °C
T
amb
= -40 °C to +125 °C
SOT765-1 package
[3]
- 250 mW
P
tot
total power dissipation
SOT833-1 package
[4]
- 250 mW
[1] The minimum input voltage ratings and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] V
CC
+ 0.5 V should not exceed 4.6 V.
[3] For SOT765-1 package: above 99 °C, the value of P
tot
derates linearly with 4.9 mW/K.
[4] For SOT833-1 package: above 68 °C, the value of P
tot
derates linearly with 3.1 mW/K.
9 Recommended operating conditions
Table 6. Recommended operating conditions
Symbol Parameter Conditions Min Max Unit
V
CC
supply voltage 0.8 3.6 V
V
I
input voltage 0 3.6 V
OE = LOW 0 V
CC
VV
O
output voltage
OE = HIGH 0 3.6 V
T
amb
ambient temperature -40 +125 °C
Δt/ΔV input transition rise and fall rate V
CC
= 0.8 V to 3.6 V 0 200 ns/V
74AVC9112 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2018. All rights reserved.
Product data sheet Rev. 1 — 23 April 2018
4 / 16