If this document is printed it becomes uncontrolled. Check latest revision in DMTech on the nearest PC
RELATED STANDARDS & issue
Test Method For Tensile Properties Of Plastics
Standard Test Methods for Non rigid Vinyl Chloride Polymer Tubing
Used for Electrical Insulation
Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use
Electrical Strength Of Insulating Materials - Test Methods -
Tests At Power Frequencies
Determination of Water Absorption
Plastics - Evaluation of the action of microorganisms.
Plastics - Methods For Determining The Density Of Non-Cellular
Plastics - Part 1: Immersion Method, Liquid Pyknometer Method And
Titration Method
Rubber, vulcanized - Determination of the effect of liquids
Tester, Abrasion, Electrical Cable
Subsequent amendments to, or revisions of, any of the above publications apply to this
standard only when incorporated in it by updating or revision.
SAMPLING
Tests shall be carried out on a sample taken at random from each batch of finished sleeving.
A batch of sleeving is defined as that quantity of sleeving extruded at any one time. Testing
frequency shall be Production Routine or Qualification. Production Routine tests consisting of
Visual Examination, Dimensions, Breaking Load, Ultimate Elongation, Crush Resistance,
Compressive Flexibility and Heat Shock shall be carried out on every batch of sleeving.
Qualification tests shall be carried out to the requirements of the Design Authority.
PACKAGING
Packaging shall be in accordance with good commercial practice. Each package shall bear an
identification label showing material quantity, description, size, colour and batch number.
Additional information shall be supplied as specified in the contract or order.