Manual Switches AML25 Series
Electronic Control Paddle
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada29
LED DISPLAY
Covers with LED
‘‘
window’’ ordered separately.
FEATURES
1 Identical to AML23, except furnished
with one or two rectangular high
efficiency LED’s which give flush
display area and wide angle
indication.
1 Available with or without diode
protection for LED’s.
1 LED circuit independent of switch
circuit.
Electrical Data page 19
Paddle Covers page 48
Lamps and LEDs page 58
Accessories page 57
Mounting Dimensions pages 59, 62
1 5 thru 24 VDC devices have internal
resistor to maintain current at nominal
20 mA.
1 UL recognized, CSA certified.
*
*
*AML25 Series: 1 pole and
2-pole only.
AML25 ORDER GUIDE
AML25 F B B 2 AA 01 R X
Housing Operator/ LED Terminal Type/ Circuitry Operating LED Color LED Color
Type Bezel Color Voltage Diode Protection Codes Code (LED A) (LED B)
AML25 F B B 2 Insert code Insert code RR
Rectangular Black/Black V* .110 × .020 letters numbers Red Red
1 LED (Solder or Q-C) as shown in from YY
C Circuitry Operating Yellow Yellow
AML25 G 5V 3 Chart Action GG
Rectangular .025 × .025 Chart Green Green
2 LED’s D (Printed Ckt.,
LED version
XX
10 V or Push-On
available
No LED No LED
only withE8
AA15 V .110 × .020
BAw/Diode
CAF protection
DA24 V
circuitry
*See LED application information for devices without current-limiting resistor, page 58.
Example: AML25FBB2AA01RX
Rectangular paddle switch; illuminated
with one red LED, this device has a black
paddle and bezel, and .110 × .020 termi-
nals; with one circuit ON and one circuit
OFF in each extreme operator position
(maintained).
NOTE: For further information on re-
placement LED’s, call the 800 number.
Covers
ordered
separately
1 The ‘‘MICRO SWITCH’’ identification is
shown on this side of the switch housings.
Manuals
