https://www.phoenixcontact.com/pi/products/1423017
08/18/2018Page1/4
Contact insert-HC-B10-I-TPT-M-1423017
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Contact insert, number of positions: 10+PE, size: B10, number of connections per position: 2, Pin, Push-in
connection, 500V, 10 A, 0.25 mm²...1.5 mm², application: Power
Why buy this product
For fast coding with plastic profile
Key Commercial Data
Packing unit 1 STK
GTIN
GTIN 4055626322704
Technical data
General
Note for housing HC-B10
Connection method Push-in connection
Number of connections per position 2
Degree of pollution 3
Overvoltage category III
Number of positions 10+PE
Insertion/withdrawal cycles ≥ 500
Size B10
Contact numbering 1 - 10
Conductor cross section 0.25 mm² ... 1.5 mm² (with ferrule)
Connection cross section AWG 26 ... 16 (with ferrule)
Stripping length of the individual wire 8 mm ±1 mm
Assembly instructions
Coding also using the CP-HC (1686478) coding profiles. HC-B6../ HC-
B10..for two coding profiles. HC-B16../ HC-B24..for four coding profiles.
Connection Connectors may only be actuated when there is no load/voltage.
