OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

LQH32PH100MNCL

P1-P3P4-P6P7-P8
Spec No.JELF243A-9135D-01 P1/8
MURATA MFG.CO., LTD
Reference Only
CHIP COIL（CHIP INDUCTORS）LQH32PH□□□□NCL SPECIFICATION
Murata Standard Reference Specification【AEC-Q200】
1.Scope
This reference specification applies to LQH32PH_NCL Series, Chip coil (Chip Inductors) automotive Electronics based
on AEC-Q200.
2.Part Numbering
(ex) LQ H 32 P H 1R0 N N C L
Product ID
Structure
Dimension
Applications Category Inductance Tolerance Dimension
Other Packaging
(L×W)
and
(T)
L:Taping
Characteristics
3.Rating
Operating Temperature Range.
(Ambient temperature; Self-temperature rise is not included) -40 to +105°C
(Product temperature; Self- temperature rise is included) -40 to +125°C
Storage Temperature Range. -40 to +125°C
Customer
Part Number
MURATA
Part Number
Inductance
DC
Resistance
(Ω)
Self
Resonant
Frequency
(MHz min)
∗3 Rated Current(mA)
ESD
5A: 8kV
∗1
(Based on
Inductance
change)
∗2 (Based on
Temperature rise)
(μH)
Tolerance
(%)
Ambient
temperature
85℃
Ambient
temperature
105℃
LQH32PHR47NNCL 0.47
N:±30
0.024±20% 100 4400 2900 1490
5A
LQH32PH1R0NNCL 1.0 0.036±20% 100 3000 2500 1380
LQH32PH1R5NNCL 1.5 0.053±20% 70 2600 2100 1110
LQH32PH2R2NNCL 2.2 0.064±20% 70 2000 1850 910
LQH32PH3R3NNCL 3.3 0.100±20% 50 1900 1550 800
LQH32PH4R7NNCL 4.7 0.155±20% 40 1600 1200 610
LQH32PH6R8NNCL 6.8 0.220±20% 40 1300 1100 550
LQH32PH100MNCL 10
M:±20
0.295±20% 30 1000 900 450
LQH32PH150MNCL 15 0.475±20% 20 800 700 330
LQH32PH220MNCL 22 0.685±20% 20 650 550 270
∗1: When applied Rated current to the Products,Inductance will be within ±30% of nominal Inductance value.
∗2: When applied Rated current to the Products, temperature rise caused by self-generated heat shall be limited
to 40°C max.
∗3: Keep the temperature (ambient temperature plus self-generation of heat) under 125°C
4. Testing Conditions
《Unless otherwise specified》 《In case of doubt》
Temperature : Ordinary Temperature (15 to 35°C) Temperature : 20 ± 2°C
Humidity : Ordinary Humidity (25 to 85 % (RH)) Humidity : 60 to 70 % (RH)
Atmospheric Pressure : 86 to 106 kPa
Spec No.JELF243A-9135D-01 P2/8
MURATA MFG.CO., LTD
Reference Only
5.Appearance and Dimensions
6.Electrical Performance
No. Item Specification Test Method
6.1 Inductance Inductance shall meet item 3. Measuring Equipment : KEYSIGHT 4192A or equivalent
Measuring Frequency: 1MHz
6.2 DC Resistance DC Resistance shall meet item 3. Measuring Equipment: Digital multi meter
6.3 Self Resonant
Frequency
(S.R.F)
S.R.F shall meet item 3. Measuring Equipment: KEYSIGHT E4991A or equivalent
7. AEC-Q200 Requirement
7.1 Performance (based on Table 5 for Magnetics(Inductors / Transformer)
AEC-Q200 Rev.D issued June. 1 2010
AEC-Q200
Murata Specification / Deviation
No Stress Test Method
3 High
Temperature
Exposure
1000hours at 125 deg C
Set for 24hours at room
temperature, then measured.
Meet Table A after testing.
Table A
4 Temperature Cycling 1000cycles
-40 deg C to + 125deg C
Set for 24hours at room
temperature,then
measured.
Meet Table A after testing.
7 Biased Humidity 1000hours at 85 deg C, 85%RH
unpowered..
Meet Table A after testing.
8 Operational Life Apply Rated Current 85 deg C
1000 hours
Set for 24hours at room
temperature, then measured
Meet Table A after testing.
9 External Visual Visual inspection
No abnormalities
10 Physical Dimension Meet ITEM 5
(Style and Dimensions)
No defects
■Unit Mass（Typical value）
0.044ｇ
Appearance No damage
Inductance Change (at 1MHz) Within ±10%
DC Resistance Change Within ±10%
2.5±0.2
2.7±0.2
2.5±0.2
1.55±0.15
3.2±0.3
0.9±0.31.3±0.2 0.9±0.3
※
No marking.
Ａ
Ａ
Ａ:
2.8max.
(in mm)
Spec No.JELF243A-9135D-01 P3/8
MURATA MFG.CO., LTD
Reference Only
AEC-Q200
Murata Specification / Deviation
No Stress Test Method
12 Resistance
to Solvents
Per
MIL-STD-202
Method 215
Not Applicable
13 Mechanical Shock
Per MIL-STD-202
Method 213
Condition C
100g’s/6ms/Half sine
Meet Table A after testing.
14 Vibration 5g's for 20 minutes,
12cycles eah of 3 orientations
Test from 10-2000Hz.
Meet Table A after testing.
15 Resistance
to Soldering Heat
No-heating
Solder temperature
260C+/-5 deg C
Immersion time 10s
Pre-heating: 150 to 180C /90±30s
Meet Table A after testing.
17 ESD Per AEC-Q200-002
ESD Rank:
Refer to Item 3. Rating
Appearance: No damage
18 Solderbility Per J-STD-002 Method b : Not Applicable
95% of the terminations is to be soldered.
(Except exposed wire)
19 Electrical
Characterization
Measured : Inductance No defects
20 Flammability Per UL-94 Not Applicable
21 Board Flex Epoxy-PCB(1.6mm)
Deflection 2mm(min)
60s minimum holding time
Holding time: 5s
Meet Table A after testing.
22 Terminal Strength Per AEC-Q200-006
A force of 17.7N for 60s
No defects
8.
Specification of Packaging
8.1 Appearance and Dimensions of plastic tape
(in mm)
Dimension of the Cavity is measured
at the bottom side.
2.9±0.2
2.0±0.05
4.0±0.1
Direction of feed
1.7±0.2
※
Lead- in/out wire
4.0±0.1
3.6±0.2
8.0±0.2
1.75±0.13.5±0.05
φ
1.5
-0
+0.1
0.2
※
The packing directions of the chip coil
in taping are unified with the in/out
positions of the lead wire.
( )
P1-P3P4-P6P7-P8

LQH32PH100MNCL

Mfr. #:
Buy LQH32PH100MNCL
Manufacturer:
Murata Electronics
Description:
Fixed Inductors
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet