OMO ElectronicOMO Electronic
Expand menu
0 Cart

OP262TRZ-EP-R7

P1-P3P4-P6P7-P9P10-P12
15 MHz, Rail-to-Rail,
Dual Operational Amplifier
OP262-EP
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.461.3113 ©2010 Analog Devices, Inc. All rights reserved.
FEATURES
Supports defense and aerospace applications
(AQEC standard)
Military temperature range (−55°C to +125°C)
Controlled manufacturing baseline
One assembly/test site
One fabrication site
Enhanced product change notification
Qualification data available on request
Wide bandwidth: 15 MHz
Low offset voltage: 325 µV maximum
Low noise: 9.5 nV/√Hz @ 1 kHz
Single-supply operation: 2.7 V to 12 V
Low supply current: 850 A maximum
Rail-to-rail output swing
Low TCV
OS
: 1 µV/°C typical
High slew rate: 13 V/µs
No phase inversion
Unity-gain stable
APPLICATIONS
Portable instrumentation
Sampling ADC amplifiers
Precision filters
PIN CONFIGURATION
OUT A
1
–IN A
2
+IN A
3
V–
4
V+
8
OUT B
7
–IN B
6
+IN B
5
OP262-EP
TOP VIEW
(Not to Scale)
0
9256-003
Figure 1. 8-Lead Narrow-Body SOIC (R Suffix)
GENERAL DESCRIPTION
The OP262-EP is a low power, precision op amp that features a
rail-to-rail output and a 15 MHz bandwidth. With its low offset
voltage of 45 μV (typical) and low noise, it is well suited for
precision filter and control applications.
This product operates from a single supply as low as 2.7 V or
from dual supplies up to ±6 V. The OP262-EP is specified over
the military temperature range (−55°C to +125°C) and is available
in an 8-lead SOIC_N package.
Additional applications information is available in the
OP162/OP262/OP462 data sheet.
OP262-EP
Rev. 0 | Page 2 of 12
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications ....................................................................................... 1
Pin Configuration ............................................................................. 1
General Description ......................................................................... 1
Revision History ............................................................................... 2
Specifications ..................................................................................... 3
Electrical Characteristics ............................................................. 3
Absolute Maximum Ratings ............................................................6
ESD Caution...................................................................................6
Typical Performance Characteristics ..............................................7
Outline Dimensions ....................................................................... 11
Ordering Guide .......................................................................... 11
REVISION HISTORY
7/10—Revision 0: Initial Version
OP262-EP
Rev. 0 | Page 3 of 12
SPECIFICATIONS
ELECTRICAL CHARACTERISTICS
V
S
= 5.0 V, V
CM
= 0 V, T
A
= 25°C, unless otherwise noted.
Table 1.
Parameter Symbol Test Conditions/Comments Min Typ Max Unit
INPUT CHARACTERISTICS
Offset Voltage V
OS
45 325 μV
−55°C ≤ T
A
≤ +125°C 1 mV
Input Bias Current I
B
360 600 nA
−55°C ≤ T
A
≤ +125°C 650 nA
Input Offset Current I
OS
±2.5 ±25 nA
−55°C ≤ T
A
≤ +125°C ±40 nA
Input Voltage Range V
CM
0 4 V
Common-Mode Rejection CMRR 0 V ≤ V
CM
≤ 4.0 V, −55°C ≤ T
A
≤ +125°C 70 110 dB
Large Signal Voltage Gain A
VO
R
L
= 2 kΩ, 0.5 ≤ V
OUT
≤ 4.5 V 30 V/mV
R
L
= 10 kΩ, 0.5 ≤ V
OUT
≤ 4.5 V 65 88 V/mV
R
L
= 10 kΩ, −55°C ≤ T
A
≤ +125°C 40 V/mV
Offset Voltage Drift
1
ΔV
OS
/ΔT 1 μV/°C
Bias Current Drift ΔI
B
/ΔT 250 pA/°C
OUTPUT CHARACTERISTICS
Output Voltage Swing High V
OH
I
L
= 250 μA, −55°C ≤ T
A
≤ +125°C 4.95 4.99 V
I
L
= 5 mA 4.85 4.94 V
Output Voltage Swing Low V
OL
I
L
= 250 μA, −55°C ≤T
A
≤ +125°C 14 50 mV
I
L
= 5 mA 65 150 mV
Short-Circuit Current I
SC
Short to ground ±80 mA
Maximum Output Current I
OUT
±30 mA
POWER SUPPLY
Power Supply Rejection Ratio PSRR V
S
= 2.7 V to 7 V 120 dB
−55°C ≤ T
A
≤ +125°C 90 dB
Supply Current/Amplifier I
SY
V
OUT
= 2.5 V 500 700 μA
−55°C ≤ T
A
≤ +125°C 850 μA
DYNAMIC PERFORMANCE
Slew Rate SR 1 V < V
OUT
< 4 V, R
L
= 10 kΩ 10 V/μs
Settling Time t
S
To 0.1%, A
V
= −1, V
O
= 2 V step 540 ns
Gain Bandwidth Product GBP 15 MHz
Phase Margin φ
m
61 Degrees
NOISE PERFORMANCE
Voltage Noise e
n
p-p 0.1 Hz to 10 Hz 0.5 μV p-p
Voltage Noise Density e
n
f = 1 kHz 9.5 nV/√Hz
Current Noise Density i
n
f = 1 kHz 0.4 pA/√Hz
1
Offset voltage drift is the average of the −55°C to +25°C delta and the +25°C to +125°C delta.
P1-P3P4-P6P7-P9P10-P12

OP262TRZ-EP-R7

Mfr. #:
Buy OP262TRZ-EP-R7
Manufacturer:
Analog Devices Inc.
Description:
Operational Amplifiers - Op Amps EP 15 MHZ RR DUAL IC
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet