MBR20200CT
http://onsemi.com
2
MAXIMUM RATINGS (Per Leg)
Rating
Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V
RRM
V
RWM
V
R
200 V
Average Rectified Forward Current (T
C
= 161°C) Per Leg
Per Package
I
F(AV)
10
20
A
Peak Repetitive Forward Current per Leg
(Square Wave, 20 kHz, T
C
= 158°C)
I
FRM
20 A
Non-Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz)
I
FSM
150 A
Peak Repetitive Reverse Surge Current (2.0 ms, 1.0 kHz)
I
RRM
1.0 A
Storage Temperature Range T
stg
−65 to +175 °C
Operating Junction Temperature T
J
−65 to +175 °C
Voltage Rate of Change (Rated V
R
) dv/dt 10,000
V/ms
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS
Characteristic Condition Symbol Value Unit
Maximum Thermal Resistance, Junction-to-Case Minimum Pad
R
q
JC
2.0 °C/W
Maximum Thermal Resistance, Junction-to-Ambient Minimum Pad
R
q
JA
60.0 °C/W
ELECTRICAL CHARACTERISTICS (Per Leg)
Characteristic
Symbol Min Typical Max Unit
Maximum Instantaneous Forward Voltage (Note 1)
(I
F
= 10 A, T
J
= 25°C)
(I
F
= 10 A, T
J
= 125°C)
(I
F
= 20 A, T
J
= 25°C)
(I
F
= 20 A, T
J
= 125°C)
V
F
−
−
−
−
0.80
0.66
0.89
0.76
0.90
0.80
1.00
0.90
V
Maximum Instantaneous Reverse Current (Note 1)
(Rated dc Voltage, T
J
= 25°C)
(Rated dc Voltage, T
J
= 125°C)
I
R
−
−
0.0002
0.4
1.0
50
mA
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
DYNAMIC CHARACTERISTICS (Per Leg)
Characteristic
Symbol Value Unit
Capacitance (V
R
= −5.0 V, T
C
= 25°C, Frequency = 1.0 MHz) C
T
500 pF
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.