4
INDUSTRIAL TEMPERATURE RANGE
IDT74FCT164245T
FAST CMOS 16-BIT BIDIRECTIONAL 3.3V TO 5V TRANSLATOR
Symbol Parameter Test Conditions
(1)
Min. Typ.
(2)
Max. Unit
VIH Input HIGH Level (Input and I/O pins) Guaranteed Logic HIGH Level 2 — 5.5 V
VIL Input LOW Level (Input and I/O pins) Guaranteed Logic LOW Level –0.5 — 0.8 V
I
IH Input HIGH Current (Input pins) VCC1 = Max. VI = VCC1 —— ±5
Input HIGH Current (I/O pins) V
CC2 = Max. — — ±15 μA
IIL Input LOW Current (Input pins) VI = GND — — ±5
Input LOW Current (I/O pins) — — ±15
VIK Clamp Diode Voltage VCC1 = Min., IIN = –18mA — –0.7 –1.2 V
V
OH Output HIGH Voltage VCC1 = Min. IOH = –3mA 2.5 3.5 — V
VCC2 = Min. IOH = –15mA 2.4 3.5 —
VIN = VIH or VIL IOH = –32mA
(5)
23—
V
OL Output LOW Voltage VCC1 = Min. IOL = 64mA — 0.2 0.55 V
VCC2 = Min.
VIN = VIH or VIL
IOFF Input/Output Power Off Leakage VCC1 = 0V, VCC2 = 0V, VIN or VO ≤ 4.5V — — ±100 μA
IOS Short Circuit Current
(4)
VCC1 = Max., VCC2 = Max., VO = GND
(3)
–80 –140 –225 mA
IO Output Drive Current VCC1 = Max., VCC2 = Max., VO = 2.5V
(3)
–50 –75 –180 mA
VH Input Hysteresis — — 150 — mV
ICC1L Quiescent Power Supply Current VCC1 = Max. — 0.08 1.5 mA
I
CC1H VCC2 = Max.
I
CC1Z VIN = GND or VCC2
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE (B PORT, 5V)
Following Conditions Apply Unless Otherwise Specified:
VCC1 = 5V ±10%, VCC2 = 2.7V to 3.6V, Industrial: TA = –40°C to +85°C
NOTES:
1. For conditions shown as Min. or Max., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC1 = 5V, VCC2 = 3.3V, +25°C ambient.
3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.
4. This parameter is guaranteed but not tested.
5. Duration of the condition cannot exceed one second.