OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

TMR 1-1213SM

P1-P3P4-P4
http://www.tracopower.com Page 1 of 4
DC/DC Converters
TMR 1 & TMR 1SM Series, 1 Watt
Order code
SIP-package
Order code
SMD-package
Input voltage range Output voltage
Output current
max.
Efficiency
SIP typ.
Efficiency
SMD typ.
TMR 1-0511 TMR 1-0511SM
5.0 VDC
200 mA 76 % 78 %
TMR 1-0512 TMR 1-0512SM
12 VDC
83 mA 77 % 79 %
TMR 1-0513 TMR 1-0513SM 4.5 – 9.0 VDC
15 VDC
67 mA 79 % 81 %
TMR 1-0515
(5 VDC nominal)
24 VDC
42 mA 76 %
TMR 1-0522 TMR 1-0522SM
±12 VDC
±42 mA 77 % 79 %
TMR 1-0523 TMR 1-0523SM
±15 VDC
±33 mA 78 % 80 %
TMR 1-1211 TMR 1-1211SM
5.0 VDC 200 mA 77 % 79 %
TMR 1-1212 TMR 1-1212SM
12 VDC 83 mA 77 % 79 %
TMR 1-1213 TMR 1-1213SM 9.0 – 18 VDC
15 VDC 67 mA 80 % 82 %
TMR 1-1215
(12 VDC nominal)
24 VDC 42 mA 77 %
TMR 1-1222 TMR 1-1222SM
±12 VDC ±42 mA 79 % 81 %
TMR 1-1223 TMR 1-1223SM
±15 VDC ±33 mA 78 % 80 %
TMR 1-2411 TMR 1-2411SM
5.0 VDC 200 mA 77 % 79 %
TMR 1-2412 TMR 1-2412SM
12 VDC 83 mA 80 % 82 %
TMR 1-2413 TMR 1-2413SM 18 – 36 VDC
15 VDC 67 mA 80 % 82 %
TMR 1-2415
(24 VDC nominal)
24 VDC 42 mA 77 %
TMR 1-2422 TMR 1-2422SM
±12 VDC ±42 mA 80 % 82 %
TMR 1-2423 TMR 1-2423SM
±15 VDC ±33 mA 80 % 82 %
TMR 1-4811 TMR 1-4811SM
5.0 VDC 200 mA 77 % 79 %
TMR 1-4812 TMR 1-4812SM
12 VDC 83 mA 78 % 80 %
TMR 1-4813 TMR 1-4813SM 36 – 75 VDC
15 VDC 67 mA 78 % 80 %
TMR 1-4815
(48 VDC nominal)
24 VDC 42 mA 76 %
TMR 1-4822 TMR 1-4822SM
±12 VDC ±42 mA 79 % 81 %
TMR 1-4823 TMR 1-4823SM
±15 VDC ±33 mA 79 % 81 %
Models
Features
◆
Wide 2:1 input voltage range
◆ Compact SIP-6 or SMD package
◆ Fully regulated outputs
◆ Cost optimised design
◆ No minimum load required
◆ Continuous short circuit protection
◆ Temperature range –40°C to +85°C
◆ I/O isolation 1500 VDC
◆ Remote On/Off control (SMD)
◆ 3-year product warranty
The TMR-1 and TMR 1SM series are families of isolated 1 W dc-dc converter mod-
ules with regulated output, featuring wide 2:1 input voltage ranges. These products
come in a compact SIP-6 or SMD package with small footprint occupying only 1.2
cm
2
(0.2 square inch) of board space.
An excellent efficiency allows –40°C to +85°C operation temperature. Further fea-
tures include remote On/Off control (SMD-Version) and continuous short circuit
protection. The compact dimensions and cost optimised design make this converters
an ideal solution for applications in communication equipment, instrumentation and
industrial electronics.
C B
Scheme
UL 60950-1
http://www.tracopower.com Page 2 of 4
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
DC/DC Converters
TMR 1 & TMR 1SM 1 Watt
Input Specifications
Input current at no load (nominal input voltage) 5.0 V models: 40 mA typ.
12 V models: 20 mA typ.
24 V models: 10 mA typ.
48 V models: 7 mA typ.
Surge voltage (1 sec. max.) 5.0 V models: 15 V max.
12 V models: 25 V max.
24 V models: 50 V max.
48 V models: 100 V max.
Start-up voltage / under voltage lockout 5.0 V models: 4.5 VDC / 4 VDC or lower
12 V models: 9 VDC / 8.5 VDC or lower
24 V models: 18 VDC / 17 VDC or lower
48 V models: 36 VDC / 34 VDC or lower
long term operation at undervoltage will
damage the converter!
Conducted noise (input) EN 55022 level A, FCC part 15, level A with
external capacitor. see EMC consideration
Recommended input fuse (slow blow) 5 V models: 500 mA
12 V models: 250 mA
24 V models: 120 mA
48 V models: 60 mA
Output Specifications
Voltage set accuracy ±1 % max.
Regulation – Input variation Vin min. to Vin max. 0.2 % max.
– No load to full load Single & Dual output models: ±1.0 % max.
– Load variation 10 – 90% Single output models: ±0.5 % max.
Dual output models: ±0.8 % max.
Minimum load no minimum load required
Temperature coefficient 0.02 %/K
Ripple and noise (20 MHz bandwidth) SMD models: 30 mVp-p max.
SIP models: 50 mVp-p max.
Transient response setting time (25% load step change) 250 µs typ. (PFM)
Transient response deviation ±5 % max.
Current limitation >120 % of Iout max.
Over load protection (Foldback) 130 %
Short circuit protection continuous, automatic recovery
Capacitive load 5 VDC models: 1‘680 µF max.
12 VDC models: 820 µF max.
15 VDC models: 680 µF max.
24 VDC models: 470 µF max.
±12 VDC models: 470 µF max. (each output)
±15 VDC models: 330 µF max. (each output)
General Specifications
Temperature ranges – Operating SIP models: –40°C to +85°C with no derating
SMD models: –40°C to +82°C with derating
– Case temperature +105°C (SIP) / +95°C (SMD) max.
– Storage –55°C to +125°C
Load derating SMD models: 7.2 %/K above +75°C
Humidity (non condensing) 95 % rel. H max.
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >2.8 Mio h
Page 3 of 4
DC/DC Converters
TMR 1 & TMR 1SM 1 Watt
General Specifications
Isolation voltage (60 sec.) – Input/Output 1’500 VDC
Isolation capacitance – Input/Output 50 pF max.
Isolation resistance – Input/Output (500 VDC) >1 GOhm
Switching frequency 220 kHz (PFM)
Safety standards CAN/CSA-C22.2 No 60950-1-07 Incl. AM1 (2011)
ANSI/UL Std No 60950-1, 2nd Ed. Incl. AM1 (2011)
IEC 60950-1:2005 (2nd Edition); +A1:2009
EN 60950-1:2006+A11:2009+A1:2010+A12:2011
– Certification documents www.tracopower.com/overview/tmr1
Remote On/Off – On: < 0.6 VDC or open circuit
(SMD models only) – Off: 2.7 to 15 VDC (ref. to –Vin)
– Off standby current: 2.5 mA max.
– Off control input current: 1 mA max.
Physical Specifications
Casing material non-conductive plastic (UL94V-0 rated)
Potting material (for SIP-package models) epox y, (UL 94V-0 rated)
Weight 3.1 g ( 0.11o z ) (SIP)/3.3 g ( 0.12oz) (SMD)
Soldering profile for SIP-package models max. 265°C / 10 sec. (wave soldering)
Lead-free reflow solder process for SMD-package models as per J-STD-020D.01 (to find at:
www.jedec.org - free registration required)
Washing Process (for SMD-package) not recommended. Product non-hermetical.
Moisture sensivity level (for SMD-package models) level 2a as per J-STD-033B.01 (to find at:
www.jedec.org - free registration required)
Environmental compliance – Reach www.tracopower.com/overview/tmr1
– RoHS RoHS directive 2011/65/EU
EMC Consideration
+Vin
-Vin
+Vout
-Vout
C1
C2
L1
Load
+Vin
-Vin
+Vout
-Vout
C1
C2
L1
Load
Com.
Load
Single output models
Input models C1 C2 L1
5 VDC 4.7µF /50V, 1210 X7R 4.7µH / 1.2 A, SR0302
12 VDC 4.7µF /50V, 1210 X7R 4.7µH / 1.2 A, SR0302
24 VDC SIP 4.7µF /50V, 1210 X7R 18µH / 0.58 A, SR0302
24 VDC SMD 4.7µF /50V, 1210 X7R
220pF /2 kV, 1808 X7R
12µH / 0.75 A, SR0302
48 VDC SIP 4.7µF /100V 1210 X7R 18µH / 0.58A, SR0302
48 VDC SMD 2.2µF / 00V 1210 X7R 18µH / 0.58A, SR0302
Dual output models
Filter suggestion for to comply with EN55022 class A conducted noise emission
P1-P3P4-P4

TMR 1-1213SM

Mfr. #:
Buy TMR 1-1213SM
Manufacturer:
TRACO Power
Description:
Isolated DC/DC Converters Product Type: DC/DC; Package Style: SMD; Output Power (W): 1; Input Voltage: 9-18 VDC; Output 1 (Vdc): 15; Output 2 (Vdc): N/A; Output 3 (Vdc): N/A
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet