AXL F AI8 1F
7989_en_03 PHOENIX CONTACT 3
Description Type Order No. Pcs./Pkt.
Axioline?F analog input module, 8 inputs: 0 - 10V, ±10V, 0 - 20mA,
4 - 20mA, ±20mA, 2-wire connection method (including bus base module
and connectors)
AXL F AI8 1F 2688064 1
Accessories Type Order No. Pcs./Pkt.
AxiolineF bus base module for housing type F (Replacement item) AXL F BS F 2688129 5
AxiolineF connector set (for e.g.,AXLFAI8 1F, AXLFAO81F) (Replace-
ment item)
AXL CNS 4L-O/D/UA/E1/E2 2700984 1
Axioline shield connection set (contains 2 busbar holders and 2 SK 5 shield
connection clamps)
AXL SHIELD SET 2700518 1
Zack marker strip for AxiolineF (device labeling), in 2 x 20.3 mm pitch, un-
printed, 25-section, for individual labeling with B-STIFT 0.8, X-PEN, or
CMS-P1-PLOTTER (Marking)
ZB 20,3 AXL UNPRINTED 0829579 25
Zack marker strip, flat, in 10 mm pitch, unprinted, 10-section, for individual
labeling with M-PEN 0,8, X-PEN, or CMS-P1-PLOTTER (Marking)
ZBF 10/5,8 AXL UNPRINTED 0829580 50
Insert label, Roll, white, unlabeled, can be labeled with: THERMOMARK
ROLL, THERMOMARK ROLL X1, THERMOMARK X, THERMOMARK
S1.1, Mounting type: snapped into marker carrier, Lettering field: 35 x 46
mm (Marking)
EMT (35X46)R 0801604 1
Documentation Type Order No. Pcs./Pkt.
User manual, English, AxiolineF: System and installation UM EN AXL F SYS INST - -
User manual, English, Axioline F: Diagnostic registers, and error messages UM EN AXL F SYS DIAG - -
Dimensions (nominal sizes in mm)
Width 53.6 mm
Height 126.1 mm
Depth 54 mm
Note on dimensions The depth is valid when a TH35-7.5 DIN rail is used (according to EN60715).
General data
Color traffic grey A RAL 7042
Weight 204 g (with connectors and bus base module)