ISL89163, ISL89164, ISL89165
13
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
FN7707.5
October 13, 2016
For additional products, see www.intersil.com/en/products.html
Submit Document Feedback
About Intersil
Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products
address some of the largest markets within the industrial and infrastructure, mobile computing, and high-end consumer markets.
For the most updated datasheet, application notes, related documentation, and related parts, see the respective product information
page found at www.intersil.com.
You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask
.
Reliability reports are also available from our website at www.intersil.com/support
.
Revision History The revision history provided is for informational purposes only and is believed to be accurate, but not warranted.
Please visit our website to make sure you have the latest revision.
DATE REVISION CHANGE
October 13, 2016 FN7707.5
Ton_delay parameter added to the AC Electrical Specifications.
The “up to 400µs” label of Figure 9 is changed to “400µs typical (Ton_delay)”.
September 30, 2015 FN7707.4
Updated the Ordering Information table on page 3.
Replaced Products section with About Intersil section.
Updated Package Outline Drawing L8.3x3I to the latest revision. Changes are as follows:
-Tiebar Note updated
From: Tiebar shown (if present) is a non-functional feature.
To: Tiebar shown (if present) is a non-functional feature and may be located on any of the 4 sides (or ends).
February 22, 2012 FN7707.3
(page 5) ENA and ENB added to the Input Range parameter
(page 6) Propagation delay testing parameters changed for option C
(page 6) Note 13 added
(page 7) Figure 3 modified to show different input thresholds for testing prop delays for option C
(page 4) The startup sequence references for the
VDD Undervoltage Lock-out parameters for Option C is now the
same as Options A and B. Options A, B, and C now have the same startup sequence.
(page 5) Note 9 is rewritten to be more precise.
(page 8) The old startup sequence for Option C has been deleted (formerly Figure 10)
(page 10) The old startup sequence description in the Functional Description Overview has been deleted.
January 9, 2012 FN7707.2
(page 1) vertical part numbers in the right margin are deleted to conform to new datasheet standards.
(page 1) Last paragraph of the product description is changed to better describe the improved turn on characteristics.
(page 1) features list is reduced in size to 8 features. Some features are reworded to improve readability.
(page 1) a reference to a non-existent application note is deleted from the Related Literature section.
(page 2) pin configuration pictures are redrawn and relabeled for readability.
(page 2) some pins description names are changed to corollate to the pin name in the pin configuration pictures.
Some descriptions are also corrected. The truth table associated with the pin descriptions is expanded to include the
logic performance of the under-voltage. (these revisions are not a change to function).
(page 4) note and figure references are added to the VDD Under-voltage lock-out parameter for options A, B, and C
(page 5) note 12 is revised to more clearly describe the turn-on characteristics of options A, B, and C.
(page 6) no load test conditions added to the rising and falling propagation matching parameters.
(page 8) figures 7 and 8 added to clearly define the startup characteristics
(page 10) the last paragraph of the Functional Description overview is replaced by 3 paragraphs to more clearly
describe the under voltage and turn-on and turn-off characteristics.
(page 11). A new section is added to the application information describing how the drivers outputs can be paralleled.
(pages 1..13) various minor corrections to text for grammar and spelling.
August 26, 2011 FN7707.1
(page 5) Note 12 revised from 200µs to 400µs
(page 4) The Operating Junction Temp Range in the “Thermal Information” was revised to read
“Maximum Operating Junction Temp Range....-40°C to +150°C” from “-40°C to +125°C”
Updated POD M8.15D by converting to new POD format. Removed table of dimensions and moved dimensions onto
drawing. Added land pattern.
October 12, 2010 FN7707.0 Initial Release