OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

83054AGILF

P1-P3P4-P6P7-P9P10-P12P13-P14
4:1, Single-Ended Multiplexer
83054
Data Sheet
©2015 Integrated Device Technology, Inc December 15, 20151
GENERAL DESCRIPTION
The 83054 is a low skew, 4:1, Single-ended Multiplexer and a
member of the family of High Performance Clock Solutions from IDT.
The 83054 has four selectable single-ended clock inputs and one
single-ended clock output. The output has a V
DDO
pin which may be
set at 3.3V, 2.5V, or 1.8V, making the device ideal for use in voltage
translation applications. An output enable pin places the output in
a high impedance state which may be useful for testing or
debug purposes. The device operates up to 250MHz and is pack-
aged in a 16 TSSOP package.
BLOCK DIAGRAM PIN ASSIGNMENT
FEATURES
• 4:1 single-ended multiplexer
• Q nominal output impedance: 7Ω (V
DDO
= 3.3V)
• Maximum output frequency: 250MHz
• Propagation delay: 3ns (maximum), V
DD
= V
DDO
= 3.3V
• Input skew: 225ps (maximum), V
DD
= V
DDO
= 3.3V
• Part-to-part skew: 780ps (maximum), V
DD
= V
DDO
= 3.3V
• Additive phase jitter, RMS: 0.19ps (typical), 3.3V/3.3V
• Operating supply modes:
V
DD
/V
DDO
3.3V/3.3V
3.3V/2.5V
3.3V/1.8V
2.5V/2.5V
2.5V/1.8V
• -40°C to 85°C ambient operating temperature
• Available in lead-free (RoHS 6) package
CLK0
CLK1
CLK2
CLK3
SEL1
SEL0
OE
Q
83054
16-Lead TSSOP
4.4mm x 5.0mm x 0.92mm package body
G Package
Top View
83054 Data Sheet
©2015 Integrated Device Technology, Inc December 15, 20152
TABLE 1. PIN DESCRIPTIONS
TABLE 2. PIN CHARACTERISTICS
TABLE 3. CONTROL INPUT FUNCTION TABLE
Number Name Type Description
1 Q Output Single-ended clock output. LVCMOS/LVTTL interface levels.
3 OE Input Pullup
Output enable. When LOW, outputs are in HIGH impedance state.
When HIGH, outputs are active. LVCMOS / LVTTL interface levels.
4, 8,
10, 14
CLK3, CLK2,
CLK1, CLK0
Input Pulldown Single-ended clock inputs. LVCMOS/LVTTL interface levels.
5 GND Power Power supply ground.
7, 9 SEL1, SEL0 Input Pulldown
Clock select input. See Control Input Function Table.
LVCMOS / LVTTL interface levels.
2, 6, 11, 13, 15 nc Unused No connect.
12 V
DD
Power Power and input supply pin.
16 V
DDO
Power Output supply pin.
NOTE: Pullup and Pulldown refer to internal input resistors. See Table 2, Pin Characteristics, for typical values.
Symbol Parameter Test Conditions Minimum Typical Maximum
Units
C
IN
Input Capacitance 4 pF
R
PULLUP
Input Pullup Resistor 51
kΩ
R
PULLDOWN
Input Pulldown Resistor 51
kΩ
C
PD
Power Dissipation Capacitance
(per output)
V
DDO
= 3.465V 18 pF
V
DDO
= 2.625V 20 pF
V
DDO
= 1.89V 30 pF
R
OUT
Output Impedance
V
DDO
= 3.465V 7
Ω
V
DDO
= 2.625V 7
Ω
V
DDO
= 1.89V 10
Ω
Control Inputs
Input Selected to Q
SEL1 SEL0
0 0 CLK0
0 1 CLK1
1 0 CLK2
1 1 CLK3
83054 Data Sheet
©2015 Integrated Device Technology, Inc December 15, 20153
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, V
DD
4.6V
Inputs, V
I
-0.5V to V
DD
+ 0.5 V
Outputs, V
O
-0.5V to V
DDO
+ 0.5V
Package Thermal Impedance, θ
JA
89°C/W (0 lfpm)
Storage Temperature, T
STG
-65°C to 150°C
NOTE: Stresses beyond those listed under Absolute
Maximum Ratings may cause permanent damage to the
device. These ratings are stress specifi cations only. Functional
operation of product at these conditions or any conditions beyond
those listed in the DC Characteristics or AC Characteristics is
not implied. Exposure to absolute maximum rating conditions for
extended periods may affect product reliability.
TABLE 4A. POWER SUPPLY DC CHARACTERISTICS, V
DD
= V
DDO
= 3.3V±5%, TA = -40°C TO 85°C
TABLE 4D. POWER SUPPLY DC CHARACTERISTICS, V
DD
= V
DDO
= 2.5V±5%, TA = -40°C TO 85°C
TABLE 4B. POWER SUPPLY DC CHARACTERISTICS, V
DD
= 3.3V±5%, V
DDO
= 2.5V±5%, TA = -40°C TO 85°C
TABLE 4C. POWER SUPPLY DC CHARACTERISTICS, V
DD
= 3.3V±5%, V
DDO
= 1.8V±0.2V, TA = -40°C TO 85°C
TABLE 4E. POWER SUPPLY DC CHARACTERISTICS, V
DD
= 2.5V±5%, V
DDO
= 1.8V±0.2V, TA = -40°C TO 85°C
Symbol Parameter Test Conditions Minimum Typical Maximum Units
V
DD
Power Supply Voltage 3.135 3.3 3.465 V
V
DDO
Output Supply Voltage 3.135 3.3 3.465 V
I
DD
Power Supply Current 40 mA
I
DDO
Output Supply Current 5mA
Symbol Parameter Test Conditions Minimum Typical Maximum Units
V
DD
Power Supply Voltage 3.135 3.3 3.465 V
V
DDO
Output Supply Voltage 2.375 2.5 2.625 V
I
DD
Power Supply Current 40 mA
I
DDO
Output Supply Current 5mA
Symbol Parameter Test Conditions Minimum Typical Maximum Units
V
DD
Power Supply Voltage 3.135 3.3 3.465 V
V
DDO
Output Supply Voltage 1.71 1.8 1.89 V
I
DD
Power Supply Current 40 mA
I
DDO
Output Supply Current 5mA
Symbol Parameter Test Conditions Minimum Typical Maximum Units
V
DD
Power Supply Voltage 2.375 2.5 2.625 V
V
DDO
Output Supply Voltage 2.375 2.5 2.625 V
I
DD
Power Supply Current 35 mA
I
DDO
Output Supply Current 5mA
Symbol Parameter Test Conditions Minimum Typical Maximum Units
V
DD
Power Supply Voltage 2.375 2.5 2.625 V
V
DDO
Output Supply Voltage 1.71 1.8 1.89 V
I
DD
Power Supply Current 35 mA
I
DDO
Output Supply Current 5mA
P1-P3P4-P6P7-P9P10-P12P13-P14

83054AGILF

Mfr. #:
Buy 83054AGILF
Manufacturer:
IDT
Description:
Clock Drivers & Distribution 4:1 Single Ended MUX
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet