THIRD ANGLE PROJ.
DATEDESCRIPTIONREV
REVISIONS
ECO APPR
CAD FILE
REV
DWG SIZE
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES AND TOLERANCES ARE:
3 PLACE DECIMAL2 PLACE DECIMAL ANGLES
0.043
1,09[ ]
0.125
3,18[ ]
0.220
5,59[ ]
MAX1.406
35,71[ ]
REF1.716
43,57[ ]
CENTER CONDUCTOR
0.187
4,75[ ]
BRAID
0.406 0.010
10,31 0,25[ ]
0.500 0.010
12,70 0,25[ ]
x45$0.010
0,25[ ]
AB
B
REFERENCE
DOR 312603-51 IL-C-39012/05-0503
CONFIGURATION LEVEL: In Work
NOTICE - These drawings, specifications, or other data (1) are, and remain the
property of Amphenol corp. (2) must be returned upon request; and (3) are
confidential and not to be disclosed to any person other than those to whom they
are given by Amphenol Corp. the furnishing of these drawings, specifications, or
other data by Amphenol Corp., or to any other person to anyone for any purpose is
not to be regarded by implication or otherwise in any manner licensing, granting
rights to permitting such holder or any other person to manufacture, use or sell any
product, process or design, patented or otherwise, that may in any way be related to
or disclosed by said drawings, specifications, or other data.
SHEET 2 OF 2
SCALE: 3.2:1.006-Jun-18K. CAPOZZI
TITLE
N RA PLUG MIL-CRIMP
(CATEGORY D) FOR
RG 142B/U & 400/U CABLES
DATEAPPROVED
Amphenol RF
www.amphenolrf.com
DATE
18-Nov-13
ENGINEER
O. BARTHELMES
MATERIAL
SEE NOTES
DATE
30-Mar-16
DRAWN
MADHAN G
FINISH
DRAWING NO. 82-4442
ITEM NO. 82-4442
PART NO. 82-4442
-- RELEASE TO MFG. -- -- --
AA FORMAT UPDATED 07-Nov-16 00601 MR
AB METRIC UNITS ADDED 06-Jun-18 8273 AG
NOTES:
1. MATERIALS AND FINISHES :
BODY,OUTER CONTACT & COUPLING NUT- BRASS, SILVER PLATING
CONTACT - BRASS, GOLD PLATING
RETAINING RING - PHOSPHOR BRONZE, NATURAL
REAR CONTACT - BeCu, GOLD PLATING
FERRULE - COPPER, SILVER PLATING
INSULATORS - PTFE, NATURAL
GASKET - SILICONE RUBBER, RED
2. ELECTRICAL:
A. IMPEDANCE: 50 OHM
3. MECHANICAL:
A. DURABILITY: 500 CYCLES MIN.
B. TEMPERATURE RANGE: -65$C TO +165$C
THIS CONNECTOR IS COVERED BY U.S. PATENT 3,439,294 & 3,474,391
4. PACKAGING:
A. QUANTITY: SINGLE PACK
B. MARKING: BAG TO BE MARKED
"AMPHENOL RF, 82-4442 AND DATE CODE"
5. CABLE ASSEMBLY INSTRUCTIONS:
A. TRIM CABLE AS SHOWN.
B. INSERT CABLE CENTER CONDUCTOR TO CONTACT.
C. SOLDER CONTACT TO CABLE OR CRIMP CONTACT TO CABLE.
WHEN CRIMPING CONTACT TO CABLE, CRIMP WITH AMPHENOL
TOOL 227-944 (M22520/5-01) AND DIE SET 227-1221-57,
CAVITY 'B' OR MILITARY TOOL M22520/1-14 (0.100 HEX) .
D. INSERT CABLE INTO CONNECTOR WITH BRAID OVER KNURL UNTIL IT BOTTOMS.
E. CRIMP FERRULE WITH AMPHENOL TOOL 227-944 (M22520/5-01) AND DIE
SET 227-1221-57 CAVITY 'A' OR MILITARY TOOL M22520/5-57, CLOSURE 'A' (0.213 HEX) .
6. SHOWS CABLE ENTRY DIMENSIONS.
MIL-C-39012 INSPECTION
INTERFACE PER
MIL-STD-348
SERIES: N PLUG
CONTACT FERRULE
STAMP 'M39012/05-0503 74868 XXXX"
BLUE
ORANGE
SCALE 1.000
RECOMMENDED CABLE
STRIPPING DIMENSIONS
CUSTOMER OUTLINE DRAWING
ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY
6
6
6
