OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

LQW18AN82NJ80D

P1-P3P4-P6P7-P9P10-P12
Spec No.JELF243A-0102F-01 P.7/12
MURATA MFG.CO., LTD
Reference
Only
No. Item Specification Test Method
8.2 Cold Resistance Appearance:No damage
Inductance Change: within ±5%
Q Change: within ±20%
Temperature:-55°C±2°C
Time:1000h (+48h,-0h)
Then measured after exposure in the room
condition for 24h±2h.
8.3 Humidit
y
Temperature: 40°C±2°C
Humidity: 90%(RH) to 95%(RH)
Time:1000h (+48h,-0h)
Then measured after exposure in the room
condition for 24h±2h.
8.4 Temperature
Cycle
1 cycle:
1 step:-55°C±2°C / 30min±3 min
2 step:Ordinary temp. / 10min to 15 min
3 step:+125°C±2°C / 30min±3 min
4 step:Ordinary temp. / 10min to15 min
Total of 10 cycles
Then measured after exposure in the room
condition for 24h±2h.
9.Specification of Packaging
9.1 Appearance and Dimensions of paper tape (8mm-wide)
(in mm)
9.2 Specification of Taping
(1) Packing quantity (standard quantity)
4,000 pcs. / reel
(2) Packing Method
Products shall be packed in the cavity of the base tape and sealed by top tape and bottom tape.
(3) Sprocket hole
The sprocket holes are to the right as the tape is pulled toward the user.
(4) Spliced point
Base tape and Top tape has no spliced point.
(5) Missing components number
Missing components number within 0.1 % of the number per reel or 1 pc., whichever is greater,
and are not continuous. The Specified quantity per reel is kept.
9.3 Pull Strength
Top tape
5N min.
Bottom tape
9.4 Peeling off force of cover tape
Speed of Peeling off 300mm/min
Peeling off force 0.1N to 0.6N
(minimum value is typical)
4.0±0.1
1.5±
2.0±0.05
4.0±0.1
Direction of feed
1.1max
1.1±0.05
1.9±0.05
8.0±0.2
3.5±0.05
1.75±0.1
0.1
0
１．１５±０．０５
F
165 to 180 degree
Top tape
Bottom tape
Base tape
Spec No.JELF243A-0102F-01 P.8/12
MURATA MFG.CO., LTD
Reference
Only
9.5 Dimensions of Leader-tape,Trailer and Reel
There shall be leader-tape ( top tape and empty tape) and trailer-tape (empty tape) as follows.
(in mm)
9.6 Marking for reel
Customer part number, MURATA part number, Inspection number(1) ,RoHS Marking (2),
Quantity etc ･･･
1) <Expression of Inspection No.>
□□ OOOO 
(1) (2) (3)
(1) Factory code
(2) Date First digit: Year / Last digit of year
Second digit: Month / Jan. to Sep. 1 to 9, Oct. to Dec. O, N, D
Third, Fourth digit : Day
(3) Serial No.
2) <Expression of RoHS Marking > ROHS – Y (△)
(1) (2)
(1)
RoHS regulation conformity parts.
(2) MURATA classification number
9.7 Marking for Outside package (corrugated paper box)
Customer name, Purchasing order number, Customer part number, MURATA part number,
RoHS Marking (2) ,Quantity, etc ･･･
9.8. Specification of Outer Case
Outer Case Dimensions
(mm)
Standard Reel Quantity
in Outer Case (Reel)
W D H
186 186 93 5
Above Outer Case size is typical. It depends on a quantity of an order.
10. ！ Caution
Limitation of Applications
Please contact us before using our products for the applications listed below which require especially
high reliability for the prevention of defects which might directly cause damage to the third party's life,
body or property.
(1) Aircraft equipment (6) Transportation equipment (vehicles, trains, ships, etc.)
(2) Aerospace equipment
(7) Traffic signal equipment
(3) Undersea equipment (8) Disaster prevention / crime prevention equipment
(4) Power plant control equipment (9) Data-processing equipment
(5) Medical equipment (10) Applications of similar complexity and /or reliability
requirements to the applications listed in the above
Empty tape
190 min.
Leader
Trailer
2.0±0.5
13.0±0.2
21.0±0.8
180
60
9.0
13.0±1.4
+1
-
0
+0
-3
Direction of feed
210 min.
160 min.
Top tape
+1
-0
Label
W
D
Label
H
Spec No.JELF243A-0102F-01 P.9/12
MURATA MFG.CO., LTD
Reference
Only
11. Notice
Products can only be soldered with reflow.
This product is designed for solder mounting.
Please consult us in advance for applying other mounting method such as conductive adhesive.
11.1 Land pattern designing
Recommended land patterns for reflow soldering are as follows:
These have been designed for Electric characteristics and solderability.
Please follow the recommended patterns. Otherwise, their performance which includes electrical performance
or solderability may be affected, or result to "position shift" in soldering process.
(in mm)
11.2 Flux, Solder
・Use rosin-based flux.
Includes middle activator equivalent to 0.06(wt)% to 0.1(wt)% Chlorine.
Don’t use highly acidic flux with halide content exceeding 0.2(wt)% (chlorine conversion value).
Don’t use water-soluble flux.
・Use Sn-3.0Ag-0.5Cu solder.
・Standard thickness of solder paste : 100μm to 150μm.
11.3 Reflow soldering conditions
・Pre-heating should be in such a way that the temperature difference between solder and product
surface is limited to 150°C max. Cooling into solvent after soldering also should be in such a way that
the temperature difference is limited to 100°C max.
Insufficient pre-heating may cause cracks on the product, resulting in the deterioration of products quality.
・Standard soldering profile and the limit soldering profile is as follows.
The excessive limit soldering conditions may cause leaching of the electrode and / or resulting
in the deterioration of product quality.
・Reflow soldering profile
Standard Profile Limit Profile
Pre-heating 150°C～180°C 、90s±30s
Heating above 220°C､30s～60s above 230°C､60s max.
Peak temperature 245°C±3°C 260°C,10s
Cycle of reflow 2 times 2 times
a 0.86
b 2.00
c 1.15
Limit Profile
Standard Profile
90s±30s
230℃
260℃
245℃±3℃
220℃
30s～60s
60s max.
180
150
Temp.
(s)
(℃)
Time.
a
b
c
Chip Coil
Solder resist
Land
P1-P3P4-P6P7-P9P10-P12

LQW18AN82NJ80D

Mfr. #:
Buy LQW18AN82NJ80D
Manufacturer:
Murata Electronics
Description:
Fixed Inductors 0603 82nH 5%
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet