Product Specification
PE42420
Page 12 of 12
Document No. DOC-14514-5 │ UltraCMOS
®
RFIC Solutions ©2010-2016 Peregrine Semiconductor Corp. All rights reserved.
Tape Feed Direction
Notes: 1. 10 sprocket hole pitch cumulative tolerance ±0.02.
2. Camber not to exceed 1 mm in 100 mm.
3. Material: PS + C.
4. Ao and Bo measured as indicated.
5. Ko measured from a plane on the inside bottom of
the pocket to the top surface of the carrier.
6. Pocket position relative to sprocket hole measured as
true position of pocket, not pocket hole.
Ao = 4.35 mm
Bo = 4.35 mm
Ko = 1.1 mm
Figure 23. Tape and Reel Drawing
Table 6. Ordering Information
Order Code Description Package Shipping Method
PE42420C-Z PE42420 SPDT RF switch Green 20-lead 4 × 4 mm LGA 3000 units / T&R
EK42420C-02 PE42420 Evaluation kit Evaluation kit 1 / Box
Advance Information:
The product is in a formative or design stage. The datasheet contains design target
specifications for product development. Specifications and features may change in any manner without notice.
Preliminary Specification:
The datasheet contains preliminary data. Additional data may be added at a later
date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best
possible product.
Product Specification:
The datasheet contains final data. In the event Peregrine decides to
change the specifications, Peregrine will notify customers of the intended changes by issuing a CNF (Customer
Notification Form).
The information in this datasheet is believed to be reliable. However, Peregrine assumes no liability for the use
of this information. Use shall be entirely at the user’s own risk.
No patent rights or licenses to any circuits described in this datasheet are implied or granted to any third party.
Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant,
or in other applications intended to support or sustain life, or in any application in which the failure of the
Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no
liability for damages, including consequential or incidental damages, arising out of the use of its products in
such applications.
The Peregrine name, logo, UltraCMOS and UTSi are registered trademarks and HaRP, MultiSwitch and DuNE
are trademarks of Peregrine Semiconductor Corp. Peregrine products are protected under one or more of the
following U.S. Patents: http://patents.psemi.com.
Sales Contact and Information
For sales and contact information please visit www.psemi.com.
