https://www.phoenixcontact.com/pi/products/2881887
08/19/2018Page2/4
Type 1 surge protection plug-FLT-CP-350-ST-2881887
Technical data
General
IEC power supply system TT
Mode of protection L-PEN
L-N
Mounting type on base element
Color gray/blue
Housing material PBT
Degree of pollution 2
Flammability rating according to UL 94 V-0
Type Male
Number of positions 1
Surge protection fault message optical
Additional descriptions
Note
Only in parallel connection with VAL-CP-350-ST. The technical
parameters are based on the combination of the two products.
Protective circuit
Nominal voltage U
N
240V AC (TN)
240V AC (TT)
Nominal frequency f
N
50 Hz (60Hz)
Maximum continuous voltage U
C
350 V AC
Nominal discharge current I
n
(8/20) µs
25 kA
Impulse discharge current (10/350)µs, charge 12.5 As
Impulse discharge current (10/350)µs, specific energy 160 kJ/Ω
Impulse discharge current (10/350)µs, peak value l
imp
25 kA
Follow current interrupt rating I
fi
25 kA (264 V AC)
3 kA (350 V AC)
Short-circuit current rating I
SCCR
25 kA (264 V AC)
3 kA (350 V AC)
Voltage protection level U
p
≤ 1.5 kV
Residual voltage U
res
≤ 1.5 kV (at I
n
)
≤ 1.2 kV (at 10 kA)
≤ 1 kV (at 5 kA)
≤ 0.9 kV (at 3 kA)
Front of wave sparkover voltage at 6 kV (1.2/50) µs ≤ 1.5 kV
TOV behavior at U
T
415 V AC (5s / withstand mode)
457 V AC (120min / safe failure mode)
Response time t
A
≤ 25 ns
Max. backup fuse with branch wiring 315 A (gG)
UL specifications
SPD Type 4CA