Pin# Pin Name Type Pin Description
1 X1_25 IN Crystal input, Nominally 25.00MHz.
2 X2 OUT Crystal output.
3 VDDXTAL1.8 PWR Power supply for XTAL, nominal 1.8V
4 vSADR/REF1.8
LATCHED
I/O
Latch to select SMBus Address/1.8V LVCMOS copy of X1 pin.
5 GNDREF GND Ground pin for the REF outputs.
6 GNDDIG GND Ground pin for digital circuitry
7 VDDDIG1.8 PWR 1.8V digital power (dirty power)
8 SCLK_3.3 IN Clock pin of SMBus circuitry, 3.3V tolerant.
9 SDATA_3.3 I/O Data pin for SMBus circuitry, 3.3V tolerant.
10 GND GND Ground pin.
11 VDD1.8 PWR Power supply, nominal 1.8V
12 vOE0# IN
Active low input for enabling DIF pair 0. This pin has an internal pull-down.
1 =disable outputs, 0 = enable outputs
13 DIF0 OUT Differential true clock output
14 DIF0# OUT Differential Complementary clock output
15 GNDA GND Ground pin for the PLL core.
16 VDDA1.8 PWR 1.8V power for the PLL core.
17 DIF1 OUT Differential true clock output
18 DIF1# OUT Differential Complementary clock output
19 vOE1# IN
Active low input for enabling DIF pair 1. This pin has an internal pull-down.
1 =disable outputs, 0 = enable outputs
20 VDD1.8 PWR Power supply, nominal 1.8V
21 GND GND Ground pin.
22 ^CKPWRGD_PD# IN
Input notifies device to sample latched inputs and start up on first high assertion.
Low enters Power Down Mode, subsequent high assertions exit Power Down
Mode. This pin has internal pull-up resistor.
23 vSS_EN_tri LATCHED IN
Latched select input to select spread spectrum amount at initial power up :
1 = -0.5% spread, M = -0.25%, 0 = Spread Off
24 GNDXTAL GND GND for XTAL
