Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
R.Cap. code
R. Voltage code
Year
Week
Polarity marking(+)
W1
H
L
W
S S
Polarity marking(+)
R.Cap. code
R. Voltage code
Year
Week
W1
H
L
W
S S
Surface Mount Type
Series : TPH
●
Small size, Low profi le (L3.2 × W 1.6 × H 0.9 mm)
●
Face down terminal type
●
RoHS compliance, Halogen free
Size code A09 A14
Category temperature range
–55 °C to +105 °C / –55 °C to +85 °C (Rated temp. +85 °C)
Rated voltage range 2.5 V.DC to 10 V.DC 2.5 V.DC to 6.3 V.DC
Category voltage range 2.5 V.DC to 10 V.DC 2.5 V.DC to 6.3 V.DC
Rated capacitance range 33 µF to 100 µF 100 µF to 220 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d) Please see the attached characteristics list
Surge voltage (V.DC) Rated voltage × 1.15
Endurance
+105 °C, 1000 h rated voltage applied
✽ Rated temp, +85 °C Products : +85 °C, 1000 h, rated voltage applied
Capacitance change
Within ±20 % of the initial value
tan
d
< 1.5 times of the initial limit
DC leakage current
Within the initial limit
Damp heat
(Steady State)
+60 °C, 90 % to 95 %, 500 h, No-applied voltage
Capacitance change
Within +50 %, −20 % of the initial value (ETPH220MABC)
Within +40 %, −20 % of the initial value (Except for above model)
tan
d
< 1.5 times of the initial limit
DC leakage current
< 3 times of the initial limit
R. Voltage (V.DC)
2.5 4.0 6.3 10.0
Code eg j A
R. Cap. (F) 33 47 68 100 150 220
Code N7 S7 W7 A8 E8 J8
Series
Rated
voltage
(V.DC)
Rated
temp.
(°C)
Category
voltage
(V.DC)
Category
temp.
(°C)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications Standard
LWH
Ripple
✽1
current
(mAr.m.s.)
ESR
✽2
(mΩ max.)
tan d
✽3
LC
✽4
(µA)
Part number
Min.
Packaging Q'ty
(pcs)
TPH
2.5
105 2.5 105 100 3.2 1.6 0.9 A09 510 150 0.10 25.0 ETPH100MHA 3000
85 2.5 85 220 3.2 1.6 1.4 A14 740 70 0.10 110.0 ETPH220MABC 2500
4
105 4.0 105 68 3.2 1.6 0.9 A09 510 150 0.10 27.2 4TPH68MHA 3000
85 4.0 85 150 3.2 1.6 1.4 A14 740 70 0.10 120.0 4TPH150MABC 2500
6.3
105 6.3 105 47 3.2 1.6 0.9
A09
510 150 0.10 29.6 6TPH47MHA 3000
85 6.3 85 100 3.2 1.6 0.9 670 100 0.10 63.0 6TPH100MAEA 3000
85 6.3 85 100 3.2 1.6 1.4 A14 740 70 0.10 126.0 6TPH100MABC 2500
10 85 10.0 85 33 3.2 1.6 0.9 A09 510 150 0.10
33.0 ATPH33MAHA
3000
✽
1 Ripple current (100 kHz/ +45 °C ),
✽
2 ESR (100 kHz/+20 °C)
✽
3 tan
d
(120 Hz/+20 °C)
✽
4 After 5 minutes
◆
Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Unit : mm
A09/A14 Size A09/A14 Size
A09 Size (6TPH100MAEA) A09 Size (6TPH100MAEA)
Size code L±0.2 W±0.2 H±0.1 S±0.2 W1±0.1
A09 3.2 1.6 0.9 0.8 1.2
A14 3.2 1.6 1.4 0.8 1.2
✽
Externals of fi gure are the reference.
Speci cations
Features
Characteristics list
Marking Dimensions (not to scale)
Nov. 201501
