OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

DG2525DN-T1-GE4

P1-P3P4-P6P7-P9P10-P11
DG2525
www.vishay.com
Vishay Siliconix
S16-1508-Rev. B, 01-Aug-16
1
Document Number: 78295
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
0.37 , Low THD and Capacitance,
Dual DPDT / Quad SPDT Analog Switch
DESCRIPTION
The DG2525, is a four-channel single-pole double-throw
(SPDT) analog switch with two control inputs. It is also
known as a two-channel double-pole double-throw (DPDT)
configuration. The part is designed to operate from 1.8 V to
5.5 V single power rail. All switches conduct equally well in
both directions, offering rail to rail signal witching and can be
used both as multiplexers as well as de-multiplexers.
The DG2525 offers low leakage, parasitic capacitance, and
highly matched low and flat switch resistance over the full
signal range. It features break-before-make switching and
low control logic threshold. The part exhibits high bandwidth
and excellent total harmonic distortion (THD). It is ideal for
both analog and digital signal switching in space constrain
applications requiring high performance and efficient use of
board space.
The DG2525 comes in a small miniQFN-16 lead package of
2.6 mm x 1.8 mm x 0.55 mm.
BENEFITS
• Low and flat resistance
• Excellent total harmonic distortion
• Low leakage and parasitic capacitance
• Low voltage control interface
FEATURES
• 1.8 V to 5.5 V single supply operation
• Low resistance: 0.4 /typ. at 2.7 V
• Highly flat and matched R
ON
• Low parasitic capacitance,
C
ON
= 26 pF, C
OFF
= 14.5 pF
• Switch off leakage: 5 pA at V+ = 3.3 V, 40 pA at V+ = 5.5 V
• High bandwidth: 310 MHz
• -100 dB THD + N at 1 kHz, 0.9 V
RMS
, R
LOAD
= 32
• Guaranteed logic high 1.2 V, logic low 0.3 V
• Break before make switching
• Signal swing over V+ capable
• Power down protection
• Latch up current: 300 mA (JESD78)
•ESD / HBM: > 6 kV
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Smart phones and tablets
• Portable instrumentation
• Audio and video signal switching
• Modems and peripherals
• Data storage
• Wireless pins
• Relay replacement
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
NC2
GND
NO3
COM3
Top view
COM1
NO1
V+
NC4
NC3
IN3-4
NO4
COM4
COM2
NO2
IN1-2
NC1
15
16
11
12
1
2
5
6
14 7
9
10
3
4
13 8
Device marking: Exx
xx = date / lot traceability code
Note: pin 1 has long lead
Exx
Pin 1
TRUTH TABLE
LOGIC NC1, 2, 3, and 4 NO1, 2, 3, and 4
0OnOff
1OffOn
DG2525
www.vishay.com
Vishay Siliconix
S16-1508-Rev. B, 01-Aug-16
2
Document Number: 78295
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
a. Signals on NC, NO, or COM, or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC board.
c. Derate 6.6 mW/°C above 70 °C.
d. Manual soldering with iron is not recommended for leadless components. The miniQFN-16 is a leadless package. The end of the lead
terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper lip
cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
ORDERING INFORMATION
TEMPERATURE RANGE PACKAGE PART NUMBER MIN. ORDER / PACK. QUANTITY
-40 °C to +85 °C lead (Pb)-free miniQFN-16 DG2525DN-T1-GE4 Tape and reel, 3000 units
ABSOLUTE MAXIMUM RATINGS (T
A
= 25 °C, unless otherwise noted)
PARAMETER SYMBOL LIMIT UNIT
Reference to GND
V+ -0.3 to +6
V
IN, COM, NC, NO
a
-0.3 to (V+ + 0.3)
Current (any terminal except NO, NC, or COM) 30
mAContinuous current (NO, NC, or COM) ± 300
Peak current (pulsed at 1 ms, 10 % duty cycle) ± 500
Storage temperature (D suffix) -65 to +150
°C
Package solder reflow conditions
d
miniQFN-16 250
Power dissipation (packages)
b
miniQFN-16
c
525 mW
DG2525
www.vishay.com
Vishay Siliconix
S16-1508-Rev. B, 01-Aug-16
3
Document Number: 78295
For technical questions, contact: analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
a. Room = 25 °C, full = as determined by the operating suffix.
b. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet.
c. Typical values are for design aid only, not guaranteed nor subject to production testing.
d. Guarantee by design, not subjected to production test.
e. V
IN
= input voltage to perform proper function.
f. Crosstalk measured between channels.
SPECIFICATIONS (V+ = 3 V)
PARAMETER SYMBOL
TEST CONDITIONS
unless otherwise specified
V+ = 3 V, ± 10 %, V
IN
= 0.5 or 1.4 V
e
TEMP.
a
LIMITS
-40 °C to +85 °C
UNIT
MIN.
b
TYP.
c
MAX.
b
Analog Switch
Analog signal range
d
V
NO
, V
NC
,
V
COM
Full 0 - V+ V
On-resistance R
ON
V+ = 2.7 V, V
COM
= 0 to 2.7 V, I
NO
, I
NC
= 100 mA Room - 0.37 0.5
Full - - 0.6
R
ON
flatness
d
R
ON
flatness
V+ = 2.7 V, V
COM
= 0 to V+,
I
NO
, I
NC
= 100 mA
Full - 0.03 0.08
R
ON
match
d
R
ON
Room - 0.05 -
Switch off leakage current
I
NO(off)
,
I
NC(off)
V+ = 5.5 V, V
NO
, V
NC
= 0.5 V / 4 V,
V
COM
= 4 V / 0.5 V
Room -1 0.04 1
nA
Full -5 - 5
I
COM(off)
Room -1 0.17 1
Full -5 - 5
Channel-on leakage
current
I
COM(on)
V+ = 5.5 V, V
NO
, V
NC
= V
COM
= 0.5 V / 4 V
Room -1 0.17 1
Full -5 - 5
Digital Control
Input high voltage V
INH
Full
1.2 - -
V
Input low voltage V
INL
--0.3
Input capacitance C
IN
Full - 5 - pF
Input current I
INL
or I
INH
V
IN
= 0 or V+ Full -1 - 1 μA
Dynamic Characteristics
Turn-on time t
ON
V
NO
or V
NC
= 1.5 V, R
L
= 50 , C
L
= 35 pF
Room - 38 60
μs
Full - - 70
Turn-off time t
OFF
Room - 0.43 1
Full - - 3
Break-before-make time t
d
Full 1 - -
Charge injection
d
Q
INJ
C
L
= 1 nF, V
GEN
= 1.5 V, R
GEN
= 0 Room - -19 - pC
-3 dB bandwidth BW R
L
= 50 , C
L
= 5 pF Room - 310 - MHz
Off-isolation
d
OIRR
R
L
= 50 , C
L
= 5 pF, f = 100 kHz
Room
--82-
dB
R
L
= 50 , C
L
= 5 pF, f = 1 MHz - -55 -
Crosstalk
d, f
X
TALK
R
L
= 50 , C
L
= 5 pF, f = 100 kHz - -89 -
R
L
= 50 , C
L
= 5 pF, f = 1 MHz - -61 -
Total harmonic distortion
plus noise
THD + N
2.5 V, signal peak to peak voltage
R
L
= 32 , f = 1 kHz
- -100 -
NO, NC off capacitance
d
C
NO(off)
f = 1 MHz Room
- 14.5 -
pF
C
NC(off)
- 14.5 -
Channel-on capacitance
d
C
NO(on)
-26-
C
NC(on)
-26-
Power Supply
Power supply range V+ 1.8 - 5.5 V
Power supply current I+ V
IN
= 0 or V+ Full - 29 60 μA
P1-P3P4-P6P7-P9P10-P11

DG2525DN-T1-GE4

Mfr. #:
Buy DG2525DN-T1-GE4
Manufacturer:
Vishay / Siliconix
Description:
Analog Switch ICs 4 Ch Dual DPDT 2 Ch SPDT 1.8-5.5V
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet