[ Home ] [ View Cart ] [ Site Map ] [ Contact ] [ Legal ]
[ Home ] [ Hardware Products ] [ Software Products ] [ CPUs ] [ Tools, etc. ] [ FAQ ] [ Partners ] [ News ]
Wiggler
Raven
usb2Demon™
USBWIGGLER™
usb2Sprite™
mpDemon™
Adapters
usbWiggler™...
Connects to USB 1.1 and USB 2 (Hi-Speed) systems ...
The usbWigger™ is a Universal Serial Bus interface
for JTAG and BDM debugging. Faster than the
classic parallel port Wiggler, it is a stable, easy to
use device and is fully compatible with all of our
software. In addition, it is a true USB 2.0 high
speed device.
Note that the usbWiggler can be upgraded later to
the clock speeds of a usb2Demon.
The usbWiggler™ is a mid-cost interface used in the design, debug, and
programming of microprocessor based embedded systems. One side of
the usbWiggler interfaces to the USB port of a host IBM compatible PC
and the other side connects to an OCD (On-Chip Debug) port of the
target system. This port may be JTAG, E-JTAG, OnCE, COP, BDM or any
of several other types of connections. When connected to a USB 2.0 port
on your PC, the usbWiggler will operate up to Hi-Speed USB rates
(480Mb/s). 32-bit Windows platforms only at this time.
MAKE SURE WE SUPPORT YOUR TARGET PROCESSOR. CLICK HERE!
NOW SUPPORTED UNDER LINUX.
$250.00
Sample download
speeds in Bytes
per second:
ARM7: 43,000
ARM9: 49,000
AU1xx0: 12,000
MPC82xx: 20,000
MPC85xx: 144,000
PPC440: 39,000
XScale: 119,000
© 2011 - Macraigor Systems LLC
Pa
e 1 of 1usbWi
ler™
3/25/2011htt
://www.macrai
or.com/usbWi
ler.htm
