Note: Interface is 3.3V C-MOS level.
Min. Typ. Max. Unit Condition Asynchronous Serial, SPI and I2C (Logic level is 3.3V for all)
Power Supply Voltage VCC 4.75 5.00 5.25 VDC
Please refer to a full specification for Characteristics of I/O ort.
CN2: Asynchronous Serial
Min. Typ. Max. Unit Condition Pin No. Signal Pin No. Signal
I2C Logic Input Current IIH-1 - - 1.0 uADC VIN=3.3V 1 VCC 8 TXD
SDA,SCL,/RESET IIL-1 - - -0.5 mADC VIN=0V 2 RXD 9 /TRDY
I2C Logic Input Voltage VIH-1 2.5 - - VDC - 3 GND 10 GND
SDA,SCL,/RESET VIL-1 - - 0.6 VDC - 4 MBUSY 11 P00
I2C Logic Output Voltage SDA,SCL
VOL-1 - - 0.5 VDC IOL=0.5mA 5 IC 12 P01
I2C Logic Output Voltage VOH-2 2.6 - - VDC IOH=-0.5mA 6 /RESET 13 P02
VOL-2 - - 0.5 VDC IOL=0.5mA 7 HBUSY 14 P03
Logic Input Current RxD IIH-2 - - 1.0 uADC VIN=3.3V
MOSI,SCK,/CS,HBUSY,/RESET IIL-2 - - -0.5 mADC VIN=0V CN2 : SPI Interface
Logic Input Voltage RXD VIH-2 2.5 - - VDC - Pin No. Signal Pin No. Signal
MOSI,SCK,/CS,HBUSY,/RESET VIL-2 - - 0.6 VDC - 1 VCC 8 MISO
Logic Output Voltage VOH-3 2.6 - - VDC IOH=-0.5mA 2 MOSI 9 /TRDY
TXD,MISO,MBUSY,/TRDY VOL-3 - - 0.5 VDC IOL=0.5mA 3 GND 10 GND
Power Supply Current ICC-1 - 340 440 mADC All dots turned on 4 MBUSY 11 P00
ICC-2 - 230 300 mADC All dots turned off 5 SCK 12 P01
ICC-3 - 12 15 mADC Display power off 6 /RESET 13 P02
Power consumption - 1.7 2.2 W All dots turned on 7 /CS 14 P03
Parameters Pin No. Signal Pin No. Signal
300 cd/m
2
Min. (600 cd/m
2
Typ.)
1 VCC 8 IC
Color of illumination Green (Bluish green) 2 SDA 9 /TRDY
Number of Dots 4,480 (140 x 32) 6 /RESET 13 P02
Active area (XxY) 69.85 mm x 21.61 mm 7 IC 14 P03
Size of Dot (XxY) 0.35 mm x 0.53 mm
Pitch of Dot (XxY) 0.50 mm x 0.68 mm
Weight approximately 68 g Parameters
Font tables 5 x 7
Alpha-numeric, Kana, International
8 x 16
Alpha-numeric, Kana, International
5x7 dot font: 18/21digits x 4 lines
Storage Temperature 16x16 dot font: 8digits x 1line
Operating Humidity 20 ~ 80% R.H. (non-condensing)
Storage Humidity 20 ~ 80% R.H. (non-condensing)
Vibration (non-operating) 10-55-10Hz, all amplitude 1mm, 30 minutes, X-Y-Z
Characters and Graphics display, Control command,
Shock (non-operating) 392m/s2 (40G) 9ms X-Y-Z, 3 times each direction Macro & P Macro, I/O port,
Touch Switch with Calibration, etc.
VF Display Module equips
16 (8x2) Capacitive
Touch Switches.
Leaflet contents, and specifications and external appearance of products, may change without notice.
Please confirm product details in the specification.
(C)Copyright NORITAKE ITRON CORP.
