SPEC NO: DSAO4525 REV NO: V.1B DATE: AUG/01/2015 PAGE: 2 OF 6
APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.Q.Xie ERP: 1203015149
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Emitting Color (Material) Lens Type
Iv (mcd) [2]
@ 2mA
iewing
Angle [1]
Min. Typ. 2θ1/2
APHBM2012LCGKSYKC
Green (AlGaInP)
Water Clear
1.2 2
Super Bright Yellow (AlGaInP) 6 10
120
°
Symbol Parameter Emitting Color Typ. Max. Units Test Conditions
λpeak Peak Wavelength
Green
Super Bright Yellow
574
590
nm I
F=2mA
λD [1] Dominant Wavelength
Green
Super Bright Yellow
570
590
nm I
F=2mA
Δλ1/2 Spectral Line Half-width
Green
Super Bright Yellow
20
20
nm I
F=2mA
C Capacitance
Green
Super Bright Yellow
15
20
pF V
F=0V;f=1MHz
V
F [2] Forward Voltage
Green
Super Bright Yellow
1.9
1.85
2.1
2.1
V I
F=2mA
I
R Reverse Current
Green
Super Bright Yellow
10
10
uA V
R = 5V
Min.
1.5
1.5
Parameter Green Super Bright Yellow Units
Power dissipation 63 63 mW
DC Forward Current 30 30 mA
Peak Forward Current [1] 150 175 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C