1/13June 2004
VND10B
DOUBLE CHANNEL
HIGH SIDE SMART POWER SOLID STATE RELAY
REV. 2
Table 1. General Features
Note: 1. In= Nominal current according to ISO definition for high
side automotive switch. The Nominal Current is the
current at T
c
= 85 °C for battery voltage of 13V which
produces a voltage drop of 0.5 V.
■ OUTPUT CURRENT (CONTINUOUS):
14 A @ T
c
=85°C PER CHANNEL
■ 5V LOGIC LEVEL COMPATIBLE INPUT
■
THERMAL SHUT-DOWN
■ UNDER VOLTAGE PROTECTION
■ OPEN DRAIN DIAGNOSTIC OUTPUT
■ INDUCTIVE LOAD FAST DEMAGNETIZATION
■ VERY LOW STAND-BY POWER
DISSIPATION
DESCRIPTION
The VND10B is a monolithic device made using
STMicroelectronics VIPower Technology,
intended for driving resistive or inductive loads
with one side grounded. This device has two
channels, and a common diagnostic. Built-in
thermal shut-down protects the chip from over
temperature and short circuit.
The status output provides an indication of open
load in on state, open load in off state,
overtemperature conditions and stuck-on to V
CC
.
Figure 1. Package
Table 2. Order Codes
Type
V
DSS
R
DS(on)
I
n
(1)
V
CC
VND10B 40 V 0.1 Ω 3.4 A 26 V
PENTAWATT
(vertical)
PENTAWATT
(horizontal)
PENTAWATT
(in-line)
Package Tube Tape and Reel
PENTAWATT Vert. VND10B –
PENTAWATT Hor. VND10B(011Y) –
PENTAWATT In line VND10B(012Y) –
Obsolete Product(s) - Obsolete Product(s)
