Supertex inc. does not recommend the use of its products in life support applications, and will not knowingly sell them for use in such applications unless it receives
an adequate “product liability indemnification insurance agreement.”
Supertex inc. does not assume responsibility for use of devices described, and limits its liability
to the replacement of the devices determined defective due to workmanship. No responsibility is assumed for possible omissions and inaccuracies. Circuitry and
specifications are subject to change without notice. For the latest product specifications refer to the
Supertex inc. (website: http//www.supertex.com)
Supertex inc. All rights reserved. Unauthorized use or reproduction is prohibited.
1235 Bordeaux Drive, Sunnyvale, CA
T
www.supertex.co
7
HV7620
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline
information go to http://www.supertex.com/packaging.html.)
Doc.# DSFP-HV7620
C112213
64-Lead PQFP (3-Sided) Package Outline (PG)
20.00x14.00mm body, 3.40mm height (max), 0.80mm pitch, 3.90mm footprint
Symbol A A1 A2 b D D1 E E1 e L L1 L2 L3 θ θ1
Dimen-
sion
(mm)
MIN 2.80 0.25 2.55 0.30 22.25 19.80 17.65 13.80
0.80
BSC
0.73
1.95
REF
0.25
BSC
0.55
REF
0
O
5
O
NOM - - 2.80 - 22.50 20.00 17.90 14.00 0.88 3.5
O
-
MAX 3.40 0.50 3.05 0.45 22.75 20.20 18.15 14.20 1.03 7
O
16
O
Drawings not to scale.
Supertex Doc. #: DSPD-64PQFPPG, Version A080812.
Note:
1. A Pin 1 identifier must be located in the index area indicated. The Pin 1 identifier can be: a molded mark/identifier; an embedded metal marker; or
a printed indicator.
2. The leads on this side are trimmed.
1
64
View B
Side View
Top View
Note 1
(Index Area
D1/4 x E1/4)
L3
Note 2
Seating
Plane
Gauge
Plane
θ
L
L1
L2
View B
Seating
Plane
A2
A
A1
D
E
E1
D1
b e
θ1
