TPP 15-J Series, 15 Watt
www.tracopower.com Page 2 of 3
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications
Input voltage range – AC range (universal input) 85 – 264 VAC
(derating of 4 %/V below 90 VAC input required)
– DC range 120 – 370 VDC
Input frequency 47 – 63 Hz
Input current at full load – at 115 VAC / 230 VAC 0.45 A max. / 0.30 A max.
Input protection T1.6 A/250 VAC (internal fuse)
Input inrush current – at 230 VAC 40 A max.
Zero load power consumption 0.05 W typ. (acc. ErP directive)
Output Specifications
Voltage set accuracy ±1%
Regulation – Input variation (Vin min. to Vin max.) 0.2% max.
– Load variation (0 to 100%) 3.3 & 5 Vout models: 0.7% max.
other output models: 0.5% max.
Minimum load not required
Temperature coefficient ±0.02%/K
Hold-up time – at 115 VAC 8 ms typ.
Start-up time 500 ms max.
Rise time 20 ms typ.
Ripple and noise 3.3 & 5 Vout models: 40 mVp-p typ.
w. cap. 10F/50V 1206 X5R MLCC
(20 MHz Bandwidth) 9, 12 & 15 Vout models: 70 mVp-p typ.
w. cap. 10F/50V 1206 X5R MLCC
24 & 36 Vout models: 100 mVp-p typ.
w. cap. 10F/50V 1206 X5R MLCC
48 Vout model: 140 mVp-p typ.
w. cap. 1F/100V 1206 X7R MLCC
Transiente response – Peak deviation (25% load step change) 5% typ.
– Recovery time 500 s typ.
Overvoltage protection 125 – 140% of nominal Vout
Current limitation at 145% Iout typ.
Short circuit protection continuous (automatic recovery), hiccup
Capacitive load 3.3 Vout model: 6‘000 F max.
5 Vout model: 4‘000 F max.
9 Vout model: 1‘860 F max.
12 Vout model: 1‘200 F max.
15 Vout model: 820 F max.
24 Vout model: 470 F max.
36 Vout model: 220 F max.
48 Vout model: 150 F max.
General Specifications
Temperature ranges – Operating –40°C to +85°C
– Storage –40°C to +100°C
Output power derating – Temperature 24, 36 & 48 Vout models: 3.6 %/K above +75°C
other output models: 3 %/K above +70°C
– Low input voltage 4.0 %/V below 90 VAC
Humidity (non condensing) 5 – 95 % rel. H.
Altitude during operation 5000 m max.
Switching frequency (at 230 VAC) 75 – 95 kHz (pulse width modulation)
Isolation voltage – Input / Output (60 s) 4000 VAC (2 MOPP insulation)
– Input / Floating (60s) 1500 VAC (1 MOPP insulation)
– Output / Floating (60s) 1500 VAC (1 MOPP insulation)