Microstructure Pressure Sensors
0 mm Hg to 300 mm Hg through 0 psi to 100 psi
HPX Serie
Sensin
and Control
FEATURES
• Miniature package size
• Available in gage and
absolute sensing types
• Non-compensated and non-
calibrated
• Pressure ranges from
0 psi to 100 psi
• Response time is 1 ms
typical
• Two package styles, DIP
and SOIC
• Wide operating temperature
range
• Surface mount and through
hole mounting
TYPICAL APPLICATIONS
• Medical equipment
• Altimeters and barometers
• Pneumatic controls
• Leak detection
• Consumer goods
WARNING
PERSONAL INJURY
DO NOT USE these
products as safety or
emergency stop devices, or
in any other application
where failure of the product
could result in personal
injury.
Failure to comply with
these instructions could
result in death or serious
injury.
The HPX Series Pressure Sensors provide accurate, low cost sensing in
two different package configurations, DIP (Dual In-line Package) and SOIC
(Small Outline Integrated Circuit).
The gage devices come in a 6-pin DIP and the absolute devices come in
an 8 pin surface mount SOIC package. Both sensor styles are non-amplified
and non-calibrated. The user may provide the HPX Series sensors with
amplification and signal conditioning circuitry to meet specific application
requirements.
These easy-to-use sensors feature Wheatstone bridge construction,
silicon piezoresistive technology and ratiometric output for proven
application flexibility, design simplicity and ease of end product
manufacturing.
These devices are intended for use with non-corrosive, non-ionic working
fluids such as air and dry gases.
WARNING
MISUSE OF DOCUMENTATION
• The information presented in this product sheet is for reference only. Do
not use this document as a product installation guide.
• Complete installation, operation, and maintenance information is
provided in the instructions supplied with each product.
Failure to comply with these instructions could result in death or
serious injury.