0.430
10.92
0.401
10.19
PNK
DO NOT SCALE DRAWING
REVISIONS
APVDBYDATE
ECO NUMBER
REV
REVPART No.NAME
OFSHEET
APVDCHKDBYDATE DRAWN
SCALE
FIRST USED ON
SPEC No.SPEC No.
MATERIALFINISH
UNLESS OTHERWISE SPECIFIED
TEMPERLBS/MMULTWIDTHSIZE
0D
BY SWITCHCRAFT INC. AND IS RELEASED ON A CONFIDENTIAL BASIS FOR IDENTIFICATION PURPOSES ONLY.
12345678
A
B
C
D
E
F
45678
A
B
C
D
E
F
C
0A
PRELIMINARY
02/09/12
PNK
*
1.5:1
02/09/12
PNK
PNK
SRC
02/09/12
02/09/12
12
EN2P SERIES CONNECTORS, RoHS
EN2P SERIES
0D
THIS DRAWING DESCRIBES A DESIGN CONSIDERED PROPRIETARY IN NATURE, DEVELOPED AND MANUFACTURED
*
SRC
SPECS UPDATED
PNK
SRC
0.005
SolidWorks CAD File
CUSTOMER DRAWING
PNK0B
05/14/12
TOOLS REVISED
SPECS UPDATED
09/20/12
0C
1. ALL DIMENSIONS IN INCHES
- TWO PLACE DECIMALS
0.02
- THREE PLACE DECIMALS
10/03/13
--26--EN3INS26
--20 and 22--
INSERTION/EXTRUCTION
CONTACT
Align and install connector into panel cut-out. Tighten hex nut 5 -6 in-lb.
ALL DIMENSIONS FOR REFERENCE ONLY
Insert wired contacts into connector housing using an insertion tool and per contacts arrangements.
not exceed 650°F (343°C).
to soldering iron temperature to 4 sec. maximum. Soldering iron temperature should
If soldering after contacts are inserted in the connector, limit exposure of contacts
If crimping, use hand or pneumatic crimp tool with crimp positioner per contact size.
Soldering or crimping conductors to contacts is recommended before insertion into connector.
Strip cable end and conductors as shown.
EN2 PANEL CONNECTOR FIELD ASSEMBLY INSTRUCTIONS:
EN3INS20
LARGE FRAME
PNEUMATIC CRIMP TOOL
EN2CRAUTOL
20, 22, 24, and 26 AWG20 and 22EN2POS20L
LARGE FRAME
HAND CRIMP TOOL
EN2CRL
26, 28, and 30 AWG26EN3POS26
20 and 22 AWG20 and 22EN2POS20
PNEUMATIC CRIMP TOOLEN3CRAUTO
26, 28, and 30 AWG26EN3POS26
20 and 22 AWG
Contacts ------------------- Copper Alloy, plated
Seal Grommet ----------- Elastomer, black
Insulator ------------------- Elastomer, black
Handle (back-shell) ----- Thermoplastic, black
Cable Clamp -------------- Thermoplastic, black
Coupling Ring ------------ Thermoplastic, black
Hex Nut: ------------------- Thermoplastic, black
Connector Housing ----- Thermoplastic, black
MATERIAL
NEMA 250 (6P), CFR 46 Part 110.20
IP16, IP18, IP66, IP67, IP68 per IEC60529
Wearthetight Ratings:
Salt Atmosphere (Corrosion): Mil-Std 202G Method 101E
Thermal Shock: Mil-Std 202G Method 107G
Insulation Resistance: Mil-Std 202G Method 302
Moisture Resistance: Mil-Std 202G Method 106G
see Current Rating Table.
Operating Temperature Limits:-40ºC to +85ºC (-40ºF to +185°F),
ENVIRONMENTAL
Current Rating: Refer to Current Rating Table
Contact Resistance: 10 mΩ maximum
Insulation Resistance: 1000 mΩ minimum
125 V AC/DC for 3-7 contact arrangements
Voltage Rating: 250 V AC/DC for 2 contact arrangement
ELECTRICAL
Hex Nut Tongue: 5-6 in-lb
Vibration: Mil-Std 202G Method 201A
Life:600 cycles minimum
MECHANICAL
SPECIFICATIONS:
20 and 22EN2POS20
HAND CRIMP TOOLEN3CR
WIRE SIZESCONTACT SIZEPOSITIONERTOOL TYPETOOL
Contacts
Wire
(awg)
Current Rating (A)
at Operating Temperature (°C)
45°C max. 55°C max. 65°C max. 75°C max. 85°C max.
2 #20
2076543.5
22 5.5 5 4 3 2.5
24 5.5 5 4 3 2.5
26 4 3.5 2.5 2 1
3 #20
20 6.5 5.5 4.5 3.5 2
22 5 4.5 3.5 3 1.5
24 5 4.5 3.5 3 1.5
2632.521.50.5
4 #22
20 5 4.5 3.5 3 1.5
22 4.5 4 3 2 1
24 4.5 4 3 2 1
2632.521.50.5
5-7 #26
2632.521.51
28 2.5 2 1.5 1 0.5
3021.510.50.5
W
EN2
Gender:
M
- Male
F
- Female
4
- In-Line**
L
- Panel*
P
- Cord
C
Connector Type:
2-3
Contact Size:
for #26
7
-
5
for #22
22
26
- #26
- #22
G3
- 0.180-0.220 (4.6-5.6)
# of Contacts:
Contact Style:
P
- PC tail (Panel connectors only)
Leave blank for Solder or Crimp
for #20
- Winged
G2
- 0.140-0.180 (3.6-4.6)
- Kit (one unit/bag)
PART NUMBER SCHEME:
K
Leave blank for Bulk
Packaging Options:
- #20
20
Grommet Code - Cable O.D. Range:
DC
- Daisy Chain (all 3 sizes)
G1
- 0.100-0.140 (2.5-3.6)
Coupling Ring option:
Leave blank for Ribbed
* for mating Cord connectors refer to EN2C SERIES drawing.
** Mating In-Line connectors not currently available.
0.375
9.53
MIN.
0.188±0.015
4.78±0.38
2-#20
2
1
CONTACT ARRANGEMENTS
PANEL CONNECTOR REAR (WIRING SIDE) VIEW
1
3-#20
2
3
1
4-#22
2
3
4
5
3
1
5-#26
4
2 2
3
1
6-#26
4
5
6 6
3
1
7-#26
4
52
7
CONTACTSSOLDER OR CRIMP
CONNECTOR
EN2 PANEL-MOUNT
CABLE
PIN 1 INDICATOR
0.625
15.88
0.107
2.72
20.07
0.790
14.94
0.588
0.140
3.56
0.250
6.35
MAX PANEL THICKNESS
0.716
18.18
0.620
15.75
SOLDER OR CRIMP TYPE CONTACTS
0.20 [5.1] TYP
0.15 [3.8] FOR 5-7 #26 CONTACTS
PC TAIL TYPE CONTACTS
0.200 [5.1] TYP
0.15 [3.8] FOR 5-7 #26 CONTACTS
0.202 [5.1] BEFORE PANEL MOUNTING,
REDUCED BY 0.010 [0.25] AFTER MOUNTING
PIN CONTACTS
(MALE)
SOCKET CONTACTS
(FEMALE)
RECOMMENDED
PANEL CUT-OUT
±0.003 [±0.08]
