OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HMC560LM3

P1-P3P4-P6P7-P8
MIXERS - SMT
7
7 - 421
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Absolute Maximum Ratings
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. MATERIAL: PLASTIC
2. PLATING: GOLD OVER NICKEL
3. ALL DIMENSIONS IN INCHES (MILLIMETERS)
4. ALL TOLERANCES ARE ±0.005 (±0.13)
5. ALL GROUNDS MUST BE SOLDERED TO PCB RF GROUND
6.
•
INDICATES PIN 1
RF / IF Input +25 dBm
LO Drive +23 dBm
IF DC Current ±2 mA
Channel Temperature 150 °C/W
Continuous Pdiss (T= 85 °C )
(derate 5.3 mW/ °C above 85 °C)
0.344 W
Thermal Resistance (R
TH
)
(channel to package bottom)
188 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -55 to +85 °C
HMC560LM3
v00.0705
MxN Spurious
Outputs as a Down Converter
nLO
mRF01234
0xx-55
13025
258484958
378736383
4888589
RF = 24 GHz @ -10 dBm
LO = 25 GHz @ +13 dBm
All values in dBc below IF output power level.
GaAs MMIC FUNDAMENTAL
SMT MIXER, 24 - 40 GHz
MIXERS - SMT
7
7 - 422
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Pin Number Function Description Interface Schematic
1, 2, 3 N/C
This pin may be connected to the PCB ground
or left unconnected.
4RF
This pin is DC coupled and matched to 50 Ohm
from 24 to 40 GHz.
5IF
This pin is DC coupled. For applications not requiring opera-
tion to DC, this port should be DC blocked externally using a
series capacitor whose value has been chosen to pass the
necessary IF frequency range. For operation to DC, this pin
must not source or sink more than 2 mA of current or part
non-function and possible part failure will result.
6LO
This pin is DC coupled and matched to 50 Ohm
from 24 to 40 GHz.
GND Package base must be soldered to PCB RF ground.
Pin Descriptions
HMC560LM3
v00.0705
GaAs MMIC FUNDAMENTAL
SMT MIXER, 24 - 40 GHz
MIXERS - SMT
7
7 - 423
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Evaluation PCB
Evaluation Circuit Board Layout Design Details
Layout Technique Micro Strip to CPWG
Material Rogers 4003 with 1/2 oz. Cu
Dielectric Thickness 0.008” (0.20 mm)
Microstrip Line Width 0.018” (0.46 mm)
CPWG Line Width 0.016” (0.41 mm)
CPWG Line to GND Gap 0.005” (0.13 mm)
Ground Via Hole Diameter 0.008” (0.20 mm)
The grounded Co-Planar Wave Guide (CPWG) PCB input/output transitions allow use of Ground-Signal-Ground
(GSG) probes for testing. Suggested probe pitch is 400 mm (16 mils). Alternatively, the board can be mounted
in a metal housing with 2.4 mm coaxial connectors.
LM3 package mounted to evaluation PCB
HMC560LM3
v00.0705
GaAs MMIC FUNDAMENTAL
SMT MIXER, 24 - 40 GHz
P1-P3P4-P6P7-P8

HMC560LM3

Mfr. #:
Buy HMC560LM3
Manufacturer:
Analog Devices / Hittite
Description:
RF Mixer GaAs MMIC DBL-BAL mix SMT 24 - 40 GHz
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet