THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
*
*
DO NOT
SCALE FROM
THIS PRINT
JW-XX-XX-XX-X-XXX-XXX-XX-X
No OF POSITIONS
-02 THRU -24
ROW SPECIFICATION
-S: SINGLE (USE HFWJ-24-156)
LEAD STYLE
-04: T-1S8-05-X-05: T-1S8
-T: MATTE TIN CONTACT AND TAIL
-TM: MATTE TIN CONTACT AND TAIL
OPTION
-P: PICK & PLACE PAD
(USE PPP-47, SEE FIG. 2, SHEET 2)
(-VS ONLY, 3 POSITION MIN,
.275[6.99] MIN POST HEIGHT)
OPTION
-VS: VERTICAL SURFACE MOUNT
POST HEIGHT
-XXX: SPECIFY POST HEIGHT
. 000 MIN (SEE NOTE 3)
-XXX: SPECIFY BOARD SPACING
SPACE OPTION
PLATING SPECIFICATION
(No OF POS x .156[.3.96])
.010[0.25]
.250
REF
6.35
.125 3.18
.078 1.97
.005 [.13]
((NO OF POS -1) x .156 [3.96])
-S: SINGLE
.125
REF
3.18
.045
SQ. REF
1.14
POST HEIGHT
-XXX
.008[0.20]
(.000 MIN)
T-1S8-05-T
C
MAX
1.250 [31.75]
.09 2.29
.250[6.35] MIN)
SPACE OPTION
-XXX
.008[0.20]
(1.080[27.43] MAX,
SEE NOTE 4
C
-S: SINGLE
.350[8.89] MIN)
SPACE OPTION
-XXX
.008[0.20]
(1.150[29.21] MAX,
.225 5.72
.31 7.87
90°
-
0°
+
4°
SEE NOTES 3 & 5
-VS: VERTICAL SURFACE MOUNT
C
.008[0.20]
.265
MIN
6.73
(SEE NOTE 3)
POST HEIGHT
-.100
SPACE OPTION
-VS IN-PROCESS
2
MAX SWAY
(EITHER DIRECTION)
24
01
-VS: VERTICAL SURFACE MOUNT
1.350 34.29
REF
POST HEIGHT
SPACE OPTION
-S IN-PROCESS
HFWJ-24-156
C
C
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
.156[3.96] POWER STACKER ASSEMBLY
BY:
JW-XX-XX-XX-X-XXX-XXX-XX-X
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
KEVIN B
06/12/2002
2
1
SHEET SCALE: 1.25:1
INSULATOR: LCP, COLOR: NATURAL
TERMINAL: PHOSPHOR BRONZE
F:\DWG\MISC\MKTG\JW-XX-XX-XX-X-XXX-XXX-XX-X-MKT.SLDDRW
NOTES:
1. HEIGHT VARIATION BETWEEN ANY TWO PINS SHALL BE .010[0.25] MAX.
2. MAXIMUM PIN ROTATION IN BODY: 2
.
3. TAIL TO BE SHEARED TO .265[6.73] MIN. A SECOND SHEAR STEP WILL
BE NEEDED AFTER FORMING TO ACHIEVE THE TAIL TO TAIL DIM.
4. MAXIMUM BURR ALLOWED: .004[0.10].
5. MAXIMUM BURR ALLOWED: .0015[0.038].
6. THROUGH HOLE TO BE BULK PACKAGED.
7. VERTICAL SURFACE MOUNT (-VS) TO BE PACKAGED AS FOLLOWS:
POSITIONS -04 THRU -24 ARE TO BE PACKAGED IN TUBES (SEE TABLE 1, SHEET 2);
POSITIONS -02 AND -03 ARE TO BE LAYER PACKAGED.
8. MIN PUSHOUT FORCE TO BE 3 LBS.
9. MAX CUT FLASH TO BE .020[0.51].
10. REPRESENTS A CRITICAL DIMENSION.
MAX BOW ALLOWED: .002[0.05] IN/IN
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
REVISION Y
