NT-MIL-3/8-0-CSP-500/1 Datasheet NT-MIL-3/8-0-BULK-SP, NT-MIL-3/8-0-CSP-500/1, NT-MIL-1/8-0-SP | P1-P2

NT-MIL

Flexible, rugged, modified elastomeric

heat-shrinkable tubing

NT-MIL modified elastomeric heat-

shrinkable tubing offers outstanding

resistance to abrasion and physical

abuse while providing flexibility and

strain relief needed in many harness-

ing applications. NT-MIL tubing is

widely used for insulation, strain relief

and abrasion protection on cable

harnesses and wire bundles in the

military and aerospace industries. It

meets the stringent requirements of

AMS-DTL-23053/1, Classes 1 and 2.

NT-MIL tubing remains flexible at

temperatures as low as -70°C without

cracking. It also withstands heat

shock at 200°C without dripping,

flowing or cracking.

NT-MIL tubing is resistant to common

fluids and solvents including aviation

and ground vehicle fuels, lubricating

oil, and hydraulic fluids. It retains

excellent physical and electrical

properties following exposure.

No special skills are required to install

NT-MIL tubing. Using standard

heating tools, one operator can

complete an installation in minutes,

substantially reducing labor costs.

NT-MIL tubing is supplied in a wide

range of sizes. Because NT-MIL is

heat-shrinkable, each size can

accommodate a variety of harness

sizes, minimizing inventory and

related costs.

Temperature rating

Full recovery temperature: 135°C

Continuous operating temperature: –70°C to 121°C

Specifications*

Type Raychem Military

NT-MIL RW-3030 AMS-DTL-23053/1, Cl. 1 and 2

*When ordering, always specify latest issue.

Dimensions (millimeters/inches)

Inside diameter Wall thickness

D (min.) d (max.) W

Expanded Recovered Recovered

Size as supplied after heating after heating**

1/8 3.2 0.125 1.6 0.062 0.66 ± 0.20 0.026 ± 0.008

3/16 4.8 0.187 2.4 0.093 0.84 ± 0.25 0.033 ± 0.010

1/4 6.4 0.250 3.6 0.143 0.89 ± 0.25 0.035 ± 0.010

3/8 9.5 0.375 5.4 0.211 1.01 ± 0.25 0.040 ± 0.010

1/2 12.7 0.500 7.3 0.286 1.21 ± 0.38 0.048 ± 0.015

5/8 15.9 0.625 9.1 0.357 1.32 ± 0.38 0.052 ± 0.015

3/4 19.1 0.750 10.9 0.428 1.44 ± 0.38 0.057 ± 0.015

7/8 22.2 0.875 12.7 0.500 1.65 ± 0.38 0.065 ± 0.015

**Wall thickness will be less if tubing recovery is restricted during shrinkage.

Ordering information

Colors Black

Size selection Always order the largest size that will shrink snugly over the component being covered.

Standard packaging On spools

Ordering description Specify product name, size, and color; for example, NT-MIL 1/4-0 (0=Black).

Fully recovered after heating

Expanded as supplied

Inside diameter Wall thickness

D (min.) d (max.) W

Expanded Recovered Recovered

Size as supplied after heating after heating**

1 25.4 1.000 14.5 0.570 1.77 ± 0.51 0.070 ± 0.020

1 1/4 31.8 1.250 18.1 0.714 2.20 ± 0.51 0.087 ± 0.020

1 1/2 38.1 1.500 21.8 0.857 2.41 ± 0.51 0.095 ± 0.020

1 3/4 44.5 1.750 25.4 1.000 2.71 ± 0.51 0.107 ± 0.020

2 50.8 2.000 29.0 1.140 2.79 ± 0.51 0.110 ± 0.020

3 76.2 3.000 43.4 1.710 3.17 ± 0.51 0.125 ± 0.020

4 101.6 4.000 57.9 2.280 3.55 ± 0.51 0.140 ± 0.020

Tyco Electronics Corporation

300 Constitution Drive Faraday Road 3816 Noborito, Tama-ku Asia Pacific Headquarters

Menlo Park, CA 94025-1164 Dorcan, Swindon, SN3 5HH Kawasaki, Kanagawa 214-8533 26 Ang Mo Kio, Industrial Park 2

USA United Kingdom Japan Singapore 569507

Tel:(800) 926-2425 (US & Canada) Tel: +44 1793 528171 Tel: +81 44 900 5102 Tel: +65 4866 151

Tel:+1 (650) 361-3860 (All other countries)

For more information about this product visit www.tycoelectronics.com

All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes

no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Electronics Corporation’s only obligations are those in the Standard Terms and

Conditions of Sale for these products and in no case will Tyco Electronics Corporation be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the

product. Tyco Electronics Corporation’s Specifications are subject to change without notice. In addition, Tyco Electronics Corporation reserves the right to make changes in materials or processing

without notification to the Buyer which do not affect compliance with any applicable specification.

Specification values

Property Unit Requirement Method of test

Material Dimensions mm (inches) See Reverse ASTM D 2671

Longitudinal change percent +1, -10 ASTM D 2671

Tensile strength psi (Mpa) 1500 (10.3) minimum ASTM D 412

Ultimate elongation percent 225 minimum ASTM D 412

Tensile stress at 200% elongation psi (Mpa) 1500 (10.3) maximum AMS-DTL-23053

Restricted shrinkage No cracks AMS-DTL-23053

(30 minutes at 135°C/

275°F)

Followed by test for:

Voltage withstand Pass

Low temperature flexibility No cracks AMS-DTL-23053

(4 hours at -70°C/-94°F)

Heat shock No cracks, flowing or AMS-DTL-23053

(4 hours at 200°C/392°F) dripping

Heat resistance ASTM D 2671

(168 hours at 121°C/

250°F)

Followed by tests for:

Tensile strength psi (Mpa) 1200 (8.3) minimum ASTM D 412

Ultimate elongation percent 175 minimum ASTM D 412

Dielectric strength volts/mil

(kv/mm) Sizes up to 7/8: ASTM D 2671

300

(11.8) minimum

Sizes 1 and larger:

200 (7.8) minimum

Electrical Dielectric strength volts/mil (kv/mm) Sizes up to 7/8: ASTM D 2671

300

(11.8) minimum

Sizes 1 and larger:

200 (7.8) minimum

Volume resistivity ohm-cm 1 x 10

minimum ASTM D 876

Chemical Copper mirror corrosion No pitting or AMS-DTL-23053

(16 hours at 150°C/302°F) corrosion

Copper contact corrosion No pitting or blackening AMS-DTL-23053

(16 hours at 150°C/302°F) of copper

Flammability Self-extinguishing in ASTM D 2671

15 seconds; 3 inches Procedure A

maximum burn length

Fungus resistance No growth ASTM G 21

Water absorption percent 1.0 maximum ASTM D 570

(24 hours at 23°C/73°F)

` Fluid resistance AMS-DTL-23053

(24 hours at 23°C/

73°F) in:

JP-8 fuel (MIL-T-83133)

Hydraulic fluid (MIL-H-5606)

Lubricating oil (MIL-L-7808)

Lubricating oil (MIL-L 23699)

Salt water (5% salt)

Anti-icing fluid (MIL-A-8243)

Followed by tests for:

Tensile strength psi (Mpa) 1000 (6.9) minimum ASTM D 412

Ultimate elongation percent 175 minimum ASTM D 412

Dielectric strength volts/mil (kV/mm) 250 (9.8) minimum ASTM D 2671

Note: Consult RW-3030 for specific details about test procedures.

Raychem is a trademark of Tyco Electronics Corporation.

P1-P2

NT-MIL-3/8-0-CSP-500/1

Mfr. #:

Buy NT-MIL-3/8-0-CSP-500/1

Manufacturer:

Raychem / TE Connectivity

Description:

Heat Shrink Tubing and Sleeves NT-MIL-3/80CSP-500/1 PRICED PER FOOT

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

NT-MIL-3/8-0-CSP-500/1

NT-MIL-3/8-0-CSP-500/1

Products related to this Datasheet