CY3202-C

PSoC
¥
Development Tools Selector Guide
The Cypress MicroSystems PSoC¥ Development Tools combine a full-featured hardware In-Circuit
Emulator (ICE) with outstanding PSoC Designer software to provide a powerful development environment
at value pricing. The easy-to-use software will increase your design efficiency and reduce debug and
evaluation time. PSoC Designer Device Editor enables rapid configuration of the PSoC device.
CY3205-DK Basic PSoC Development Kit
Everything you need to get started with PSoC is
included in the Development Kit with support
for the 28-pin PDIP package:
 PSoC Designer IDE Software CD-ROM
o Device Editor
o Application Editor
o Assembler
o Debugger
o Tutorials/Training Material
o Device Data Sheet
 ICE-4000 In-Circuit Emulator
 Generic ICE Pod
 28-PDIP Pod, Foot, and Mask  YProgrammer PCB with 28-PDIP Socket
 PSoC Pup Demonstration Board  Parallel Cable, CAT 5e Cable
 110 ~ 240V Power Supply, Euro-Plug Adapter  2 CY8C26443-24PI 28-PDIP Chip Samples
CY3202-C iMAGEcraft C Compiler
Taking advantage of the PSoC architecture, this optimizing C Compiler offers the designer increased
development speed and portability. Although licensed separately, the compiler is fully integrated into PSoC
Designer. PSoC Designer provides source-level debugging to round out its C-language support. Features
Include:
 ANSI C Compiler
 Inline Assembly and Interface with Assembly Modules
 Modern Stack-Based Architecture
 7 Basic Data Types Including IEEE 32-Bit Floating Point
 Assembler and Linker
 Math and String Libraries
 C Interrupt Service Routines
 Librarian
Emulation Pods for All Package Types
PSoC Emulator Pod Selection Guide
Emulation pods are available to support all pin counts for a particular package type. The pod kit includes the
generic pod, feet for all pin counts of a package type, masks, chip samples, and a simple blink-the-LED ‘Pup’
demo board (not included in the CY3203-2 kit).
Chip Part # Pod Kit Part # Package Type # of Feet Included
CY8C25122-24PI
CY8C26xxx-24PI
CY3206-PI 8, 20, 28, 48 PDIP 1 Each
CY8C26xxx-24SI CY3206-SI 20, 28, SOIC 2 Each
CY8C26xxx-24PVI CY3206-PVI 20, 28, 48 SSOP 2 Each
CY8C26643-24AI CY3206-AI 44 TQFP 2
-- CY3203-2 --
None (Pod and 2
Each of 8/20 and
28-Pin Masks)
PSoC Emulator Replacement Pod Feet Selection Guide
The surface mount feet are soldered to the target PCB and are not reusable. Feet are delicate and may easily
damage. Order enough additional feet to support anticipated prototype requirements.
Chip Part # Spares Kit Part # Description
CY8C25122-24PI CY3203-012 2 Spare Pod Feet for 8-Pin DIP
CY8C26233-24PI CY3203-022 2 Spare Pod Feet for 20-Pin DIP
CY8C26233-24SI CY3203-050 10 Spare Pod Feet for 20-Pin SOIC
CY8C26233-24PVI CY3203-060 10 Spare Pod Feet for 20-Pin SSOP
CY8C26443-24PI CY3203-032 2 Spare Pod Feet for 28-Pin DIP
CY8C26443-24SI CY3203-070 10 Spare Pod Feet for 28-Pin SOIC
CY8C26443-24PVI CY3203-080 10 Spare Pod Feet for 28-Pin SSOP
CY8C26643-24PI CY3203-042 2 Spare Pod Feet for 48-Pin DIP
CY8C26643-24PVI CY3203-095 5 Spare Pod Feet for 48-Pin SSOP
CY8C26643-24AI CY3203-105 5 Spare Pod Feet for 44-Pin TQFP
Device Programming for Prototypes
YProgrammer boards are used with the ICE to program parts for system prototypes. The YProgrammer
board is connected to the ICE in place of the pod. A single ZIF socket is included.
Chip Part # YProgrammer Part # Package Type
CY8C25122-24PI CY3205-S1 8 PDIP
CY8C26233-24PI CY3205-S1 20 PDIP
CY8C26233-24SI CY3205-S2 20 SOIC
CY8C26233-24PVI CY3205-S3 20 SSOP
CY8C26443-24PI CY3205-S1 28 PDIP
CY8C26443-24SI CY3205-S2 28 SOIC
CY8C26443-24PVI CY3205-S3 28 SSOP
CY8C26643-24PI CY3205-S1 48 PDIP
CY8C26643-24PVI CY3205-S4 48 SSOP
CY8C26643-24AI CY3205-S5 44 TQFP
To accommodate the largest number of pin counts with each board, the largest socket is installed. For
example, the CY3205-S1 includes a 48-pin DIP socket. It therefore supports 8, 20, 28, and 48-pin DIP parts.
The CY3205-S3 includes a 28-pin SSOP socket that can accept both the 20 and 28-pin SSOP parts. The body
width of the 48-pin SSOP package is wider than the 20 and 28-pin so the CY3205-S4 is necessary for the
48-pin SSOP parts.
CY3203-032
CY3205-S1
Pup
Pod
3
rd
Party Development Tools
Tools have been specially designed to accompany PSoC devices during development by the following 3
rd
-
party vendors. Specific details for each of these tools can be found online under 3
rd
Party Tools at
http://www.cypressmicro.com/
.
Aries Development
The PSoC PROTO BOARD is a complete standalone
development board for evaluating and developing applications
using PSoC devices. It was created to give engineers the ability
to develop and test applications without creating their own
custom board. It is easily configurable to schematically “look
like” your end application. It allows development with any
PSoC device in a DIP package.
http://aries-development.com/devtools/PSoC.htm
Arista Systems
 SERIAL Interface, speeds up to 115k baud.
 Application works in Windows 95/98/Me/NT/2000/XP.
 Easy to use programming application.
 Serial command protocol documented so you can program
devices with your custom application.
 Multiple programmers can be connected to one computer.
 Supports reset or power-on programming mode
acquisition.
 3.3- and 5-volt compatible.
 When using power line to enable programming,
programmer can switch amps.
 All PSoC devices supported.
 Auto Serial Numbering, assigns unique serial numbers to devices when programming, even when using multiple
programmers over a network.
 Dual color LED on programmer turns red during programming.
 Multiple programming options, erase/verify/read/secure/retrieve checksums and device ID.
 Free software upgrades on the web for new PSoC devices in the future.
http://www.aristasystems.com/psocisp.htm
Orlin Technology
The OTPSoC Kit enables evaluation and prototyping of the complete family of
Cypress MicroSystems Programmable System-on-Chip (PSoC™) devices.
The OTPSoC retains compatibility with Cypress’ own PSoC Pup basic
evaluation board while adding a wealth of features to allow evaluation of the
complete feature-set of the entire PSoC device family.
The OTPSoC fully supports the Cypress MicroSystems PSoC-ICE for code
debug and both out-of-system and in-system programming.
http://www.orlin.com/OTPSoC.htm
For information and support with PSoC devices: http://www.cypressmicro.com/.
Items may be purchased online at the Cypress Online Store: http://www.onfulfillment.com/cypressstore/.
Or you can purchase your Development Tools from one of Cypress’ accredited e-commerce distributors.
http://www.cypressmicro.com/ / http://www.cypress.com/aboutus/sales_locations.cfm / support@cypressmicro.com
Copyright © 2002 Cypress MicroSystems, Inc. All rights reserved.
PSoC
(Programmable System on Chip) is a trademark of Cypress MicroSystems, Inc.
All other trademarks or registered trademarks referenced herein are property of the respective corporations.
The information contained herein is subject to change without notice.
Cypress MicroSystems, Inc.
22027 17th Ave. SE Suite 201
Bothell, WA 98021
Phone: 877.751.6100
Fax: 425.939.0999

CY3202-C

Mfr. #:
Manufacturer:
Cypress Semiconductor
Description:
PSOC C-COMPILER FOR CY8C25/8C26
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union