OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

LQH43PH101M26L

P1-P3P4-P6P7-P8
Spec No.JELF243A-9137D-01 P1/8
MURATA MFG.CO., LTD
Reference Only
CHIP COIL（CHIP INDUCTORS）LQH43PH□□□□26L SPECIFICATION
Murata Standard Reference Specification【AEC-Q200】
1. Scope
This reference specification applies to LQH43PH_26L Series, Chip coil (Chip Inductors) for automotive Electronics based
on AEC-Q200.
2. Part Numbering
(ex) LQ H 43 P H 1R0 N 26 L
Product ID
Structure
Dimension
Applications Category Inductance Tolerance
Dimension
Packaging
(L×W)
and
(T)
L:Taping
Characteristics
1 1 1
1
1 1 1 1
1
3. Rating
・Operating Temperature Range.
(Ambient temperature; Self-temperature rise is not included) -40 to +105°C
(Product temperature; Self- temperature rise is included) -40 to +125°C
・Storage Temperature Range.
-40 to +105°C
Customer
Part Number
MURATA
Part Number
Inductance
DC
Resistance
(Ω)
Self
Resonant
Frequency
(MHz min)
∗3 Rated Current(mA)
ESD
5A:8kV
(μH)
Tolerance
(%)
∗1
(Based on
Inductance
change)
∗2 (Based on
Temperature rise)
Ambient
temperature
85℃
Ambient
temperature
105℃
LQH43PH1R0N26L 1.0 N:±30 0.026±20% 100 3400 3300 1410
5A
LQH43PH2R2M26L 2.2
M:±20
0.042±20% 45 2300 2500 1120
LQH43PH3R3M26L 3.3 0.052±20% 40 1800 2100 1000
LQH43PH4R7M26L 4.7 0.075±20% 35 1400 1600 780
LQH43PH6R8M26L 6.8 0.098±20% 30 1200 1400 760
LQH43PH8R2M26L 8.2 0.128±20% 25 1100 1300 670
LQH43PH100M26L 10 0.147±20% 20 1050 1170 620
LQH43PH220M26L 22 0.327±20% 15 700 780 400
LQH43PH470M26L 47 0.718±20% 8 470 520 280
LQH43PH101M26L 100 1.538±20% 4 320 320 180
LQH43PH151M26L 150 2.362±20% 3 280 260 140
LQH43PH221M26L 220 2.900±20% 2 220 240 130
∗1: When applied Rated current to the Products,Inductance will be within ±30% of nominal Inductance value.
∗2: When applied Rated current to the Products, temperature rise caused by self-generated heat shall be limited to
40°C max.
∗3: Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
4. Testing Conditions
<Unless otherwise specified> <In case of doubt>
Temperature : Ordinary Temperature (15 to 35°C) Temperature : 20C± 2°C
Humidity : Ordinary Humidity (25 to 85 %(RH) Humidity : 60 to 70%(RH)
Atmospheric Pressure : 86 to 106 kPa
Spec No.JELF243A-9137D-01 P2/8
MURATA MFG.CO., LTD
Reference Only
5. Appearance and Dimensions
■
Unit Mass (Typical value)
0.13g
※No Marking
(in mm)
6. Electrical Performance
No. Item Specification Test Method
6.1 Inductance
Inductance shall meet item 3. Measuring Equipment:
KEYSIGHT 4284A or equivalent
Measuring Frequency: 1MHz
6.2 DC Resistance DC Resistance shall meet item 3. Measuring Equipment: Digital multi meter
6.3 Self Resonant
Frequency
(S.R.F)
S.R.F shall meet item 3. Measuring Equipment:
KEYSIGHT E4991A or equivalent
7. AEC-Q200 Requirement
7.1 Performance (based on Table 5 for Magnetics(Inductors / Transformer)
AEC-Q200 Rev.D issued June. 1 2010
AEC-Q200
Murata Specification / Deviation
No Stress Test Method
3 High
Temperature
Exposure
1000hours at 125 deg C
Set for 24hours at room
temperature, then measured.
Meet Table A after testing.
Table A
4 Temperature
Cycling
1000cycles
-40 deg C to + 125deg C
Set for 24hours at room
temperature,then
measured.
Meet Table A after testing.
7 Biased Humidity 1000hours at 85 deg C, 85%RH
unpowered..
Meet Table A after testing.
8 Operational Life Apply Rated Current 85 deg C
1000 hours
Set for 24hours at room
temperature, then measured
Meet Table A after testing.
9 External Visual Visual inspection
No abnormalities
10 Physical
Dimension
Meet ITEM 5
（Style and Dimensions）
No defects
12 Resistance
to Solvents
Per
MIL-STD-202
Method 215
Not Applicable
3.6±0.2
3.2±0.2
3.2±0.2
4.5±0.3
0.5min.
2.6min.
1.0min.
1.0min.
2.6±0.2
Appearance No damage
Inductance Change (at 1MHz) Within ±10%
DC Resistance Change
Within ±10%
Spec No.JELF243A-9137D-01 P3/8
MURATA MFG.CO., LTD
Reference Only
AEC-Q200
Murata Specification / Deviation
No Stress Test Method
13 Mechanical Shock
Per MIL-STD-202
Method 213
100g’s/6ms/Half sine
Meet Table A after testing.
14 Vibration 5g's for 20 minutes,
12cycles eah of 3 orientations
Test from 10-2000Hz.
12cycles each of 3 orientations
Meet Table A after testing.
15 Resistance
to Soldering Heat
No-heating
Solder temperature
260C+/-5 deg C
Immersion time 10s
Pre-heating: 150 to 180C /90±30s
Meet Table A after testing.
17 ESD
Per AEC-Q200-002
ESD Rank:
Refer to Item 3. Rating
Appearance: No damage
18 Solderbility Per J-STD-002 Method B : Not Applicable
95% of the terminations is to be soldered.
(Except exposed wire)
19 Electrical
Characterization
Measured : Inductance No defects
20 Flammability Per UL-94
Not Applicable
21 Board Flex Epoxy-PCB(1.6mm)
Deflection 2mm(min)
60s minimum holding time
Holding time: 5s
Meet Table A after testing.
22 Terminal Strength Per AEC-Q200-006
A force of 17.7N for 60s
No defects
8. Specification of Packaging
8.1 Appearance and Dimensions of plastic tape
(in mm)
Dimension of the Cavity is measured at the bottom side.
8.2 Specification of Taping
(1) Packing quantity (standard quantity)
500 pcs / reel
(2) Packing Method
Products shall be packed in the each embossed cavity of plastic tape and sealed by cover tape.
(3) Sprocket hole
The sprocket holes are to the right as the tape is pulled toward the user.
(4) Spliced point
Plastic tape and Cover tape has no spliced point.
(5) Missing components number
Missing components number within 0.1 % of the number per reel or 1 pc., whichever is greater, and
are not continuous. The specified quantity per reel is kept.
3.6
2.0±0.05
8.0±0.1
Direction of feed
2.7±0.2
4.0±0.1
4.9
12.0±0.3
1.75±0.1
5
.
5±0.05
φ
1.5
-0
+0.1
0.3±0.05
※
Lead- in/out wire
※
Thepackingdirectionsofthechipcoil
in taping are unified with the in/out
positions of the lead wire.
4.9±0.1
3.6±0.1
2.7±0.1
(0.3)
P1-P3P4-P6P7-P8

LQH43PH101M26L

Mfr. #:
Buy LQH43PH101M26L
Manufacturer:
Description:
FIXED IND 100UH 320MA 1.8456 OHM
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet