I
NTEGRATED
C
IRCUITS
D
IVISION
DS-CPC5001-R02 www.ixysic.com 1
Features
• Isolates One Signal in Each Direction
• Operates From 2.7V to 5.5V
• Buffered Inputs - No External LED Drive Required
• Voltage Level Translation
• Hysteresis at Inputs for Noise Rejection
• Slew-Limited Drivers Reduce EMI
• Power-Down to Hi-Z Does Not Load Outputs
• 5Mbaud Data Rate
• 8-Pin DIP or Surface Mount Packages
Applications
• Isolated Signal Monitoring and Control
• Power-Over-Ethernet
• Power Supply High-Side Interface
• Logic-Level Translation
• Microprocessor System Interface
• Inter-Integrated Circuit (I
2
C) Interface
• Serial Peripheral Interface (SPI)
• Full Duplex Communication
• Isolated Line Receiver
• Isolated Data Acquisition Systems
Approvals
• UL Recognized Component: File E76270
• EN/IEC 60950: Certificate B 12 11 82667 001
Description
The CPC5001 is a dual, non-inverting digital optical
isolator with buffered-logic inputs and open-drain
outputs. Channel 1 propagates a signal from Side A to
Side B, while Channel 2 sends a signal from Side B to
Side A. It provides galvanic isolation up to 3750V
rms
.
When the two sides are powered by supplies with
different voltages, it also functions as a logic level
translator for supply voltages as low as 2.7V or as high
as 5.5V. Available in 8-pin DIP and surface mount
packages, it functionally replaces two logic buffers and
two single-channel optoisolators. Internal bandgap
references regulate the LED drive currents to 3mA to
reduce peak power requirements.
Unlike transformer or capacitive isolators, optical
isolation passes DC signals, and does not need to be
clocked periodically to refresh state. Buffered signals
will always return to their proper value after a transient
interruption at either side.
Ordering Information
Figure 1. CPC5001 Functional Block Diagram
Part Description
CPC5001G 8-Pin DIP in Tubes (50 / Tube)
CPC5001GS 8-Pin Surface Mount (50 / Tube)
CPC5001GSTR 8-Pin Surface Mount (1000 / Reel)
A
GNDA
B
GNDB
V
DDA
GNDA
V
DDA
CHANNEL 2
V
DDB
LED
IN2
V
DDA
OUT2
A
V
DDA
LED
IN1
V
DDB
OUT1
B
GNDB
V
DDB
V
DDB
CHANNEL 1
1
2
3
4
8
7
6
5
CPC5001
Dual, One Channel Each Direction
Digital Optical Isolator