Dimensions: [mm]
Scale - 6:1
2,14 ±0,16
2,25 ±0,25
1,14 ±0,38
5,11 ±0,2
1,45 ±0,2
4,24 ±0,26
2,67 ± 0,13
Marking ZP
Product Marking:
Recommended Land Pattern: [mm]
Scale - 6:1
1,70
1,90
6,50
2,30
Schematic:
Properties Test conditions Value Unit Tol.
DC Operating Voltage V
DC
70 V max.
(Reverse) Breakdown Voltage 1 mA V
BR
81.9 V ±5%
Clamping Voltage I
PEAK
V
Clamp
113 V max.
(Reverse) Peak Pulse Current 10/1000 µs I
Peak
3.5 A max.
Leakage Current V
DC
I
LEAK
1 µA max.
Steady State Power Dissipation T
A
= 50 °C P
DISS
3.3 W max.
Power Dissipation
1)
10/1000 µs P
DISS
400 W max.
Polarity Bidirectional
Electrical Properties:
1)
Mounted on 5.0 mm x 5.0 mm (0.03 mm thick) Copper Pads to each terminal
It is recommeded that the temperature of the component does not exceed +150°C under worst
case conditions
Operating Temperature -65 °C up to +150 °C
Storage Temperature (in original
packaging)
-40 °C up to +60 °C
Test conditions of Electrical Properties: +20°C, 33% RH if not specified differently
General Information:
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
CREATED CHECKED GENERAL TOLERANCE PROJECTION
METHOD
KaS RoD DIN ISO 2768-1m
DESCRIPTION
WE-TVSP Power TVS Diode
ORDER CODE
824501701
SIZE REVISION STATUS DATE BUSINESS UNIT PAGE
DO-214AC
001.000 Draft 2015-11-10 eiSos 1/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
