8102 Datasheet CrystalFree™ Oscillator
June 1, 2011 www.IDT.com ©2011 Integrated Device Technology, Inc
Absolute Maximum Ratings
Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. These ratings are
stress specifications only. Functional operation of product at
these or under any condition beyond those listed in the
operating specifications is not implied. Exposure to absolute
maximum rated conditions may affect product reliability.
Item Maximum Absolute Rating
VDD 4.6 V
OUT -0.5 V to VDD + 0.5 V
Pin Descriptions
Pin # Name Description
1 STBY# Standby Mode
(0 = Output Disabled)
2 GND Ground
4 VDD Power
1. Pulled high internally
2. Weak pull down to GND during STBY# enable and startup
Solder Reflow Profile
Output Waveform
Ordering Information
Sales
800-345-7015 (inside USA)
+1 408-284-8200 (outside USA)
Fax: 408-284-2775
Technical Support
crystalfreetechsupport@idt.com
+1 408-739-5400
6024 Silver Creek Valley Road
San Jose, California 95138
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document,
including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not
guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the
suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any
license under intellectual property rights of IDT or any third parties.
IDT’s products are not intended for use in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an
IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective
third party owners.
Copyright 2010, 2011. All rights reserved.
Temperature (°C)
217°C
150°C
60-150
sec
40 sec (max)
245°C
(260°C max)
60-180
sec
3
°
C/sec max
6
°
C/sec max
50
100
150
200
250
Time
Temperature (°C)
217°C
150°C
60-150
sec
40 sec (max)
245°C
(260°C max)
60-180
sec
3
°
C/sec max
6
°
C/sec max
50
100
150
200
250
50
100
150
200
250
Time
0.8 VDD
0.2 VDD
T
R
T
F
V
OH
V
OL
0.5 VDD
t
2
t
1
SYM = t
1
/ t
2
Time
0.8 VDD
0.2 VDD
T
R
T
F
V
OH
V
OL
0.5 VDD
t
2
t
1
SYM = t
1
/ t
2
Time
8 1 0 2 -
50
E T
V P C
N S G
NSG: 5.0 x 3.2 (4 pin)
NVG: 2.5 x 2.0 (4 pin)
Package
Blank: 0 to 70°C
E: -20 to 70°C
Temp
Blank: Tubes
T: Tape and Reel
Shipping
4 to 50MHz
Frequency
