MAX4571–MAX4574
Serially Controlled, Clickless
Audio/Video Switches
14 ______________________________________________________________________________________
Figure 6. A Complete 3-Wire Serial-Interface Transmission
isters by connecting DOUT of the first device to DIN of
the second, etc. Connect the CS pins of all devices
together. Data are shifted through the MAX4573/
MAX4574s in series. When CS is brought high, all
devices are updated simultaneously. If any of the
devices in the chain are to be left unchanged, use a
NO_OP command for that device, as shown in Table 1.
An alternate way of connecting multiple devices is to
decode the CS line. In this case the DOUT pin is not
used and the DIN pins of all devices are connected
together. Address decode logic individually controls the
CS line of each device. When a device is to be selected
its CS line is brought low, data are shifted in, and its CS
is then brought high to execute the command.
