OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

CC-WMX-PF47-TK

P1-P3P4-P5
BLOCK DIAGRAM
RELATED PRODUCTS
Cost-eective small-footprint System-on-Module solution delivers performance, low-
power operation and integrated 802.11a/b/g/n, Bluetooth 4.0 and Ethernet connectivity
CONNECTCARD
™
FOR i.MX28
BENEFITS
– Cost-eective design in compact form factor
– 32-bit ARM processor at up to 454 MHz
– Single/dual 10/100 Ethernet connectivity options
– Pre-approved 802.11a/b/g/n Wi-Fi + Bluetooth 4.0
- Includes Wi-Fi® Access Point mode + Wi-Fi Direct™
- Support for Bluetooth 3.0 + HS and Bluetooth LE
- Ready for Cisco CCX and Wi-Fi Logo certification
– Digi Embedded Linux platform
- Digi Device Cloud
SM
enabled
- Includes complete Digi BSP source code
– Long-term product availability
– Additional ZigBee®, 802.15.4, cellular and
satellite connectivity options (o-module)
ConnectCore® 6 ConnectCore® 6
SBC
Development
Kits
ConnectCore®
for i.MX53
XBee®
Based on the NXP i.MX28 processor family, the ConnectCard
for i.MX28 is an ideal embedded platform solution for
connected applications in medical and healthcare, energy,
transportation and industrial/building automation.
It oers easy design integration and unique peripheral/
interface flexibility in an extremely compact and cost-eective
form factor. This module is suitable for a wide range of
dierent devices, including battery powered product designs.
The module is equipped with a highly integrated 32-bit ARM
core running at up to 454 MHz, on-chip power management,
dual Ethernet and 802.11a/b/g/n networking options, Bluetooth
4.0 connectivity, dual FlexCAN options, GPIO, ADC, UART, USB
high-speed, SPI, I2C, I2S, 1-Wire, PWM and JTAG/ETM.
The Digi JumpStart Kit® for Digi Embedded Linux provides a
complete turnkey embedded development solution allowing
immediate and successful product development with
accelerated time-to-market and reduced design risk.
COMPACT CORE
MODULE WITH
WIRELESS AND WIRED
CONNECTIVITY
10/100 Ethernet
IEEE 1588 x 2
L2 Switch
PHY PHY
10/100 Ethernet
IEEE 1588 x 2
HS USB Phy x 2
ADVANCED CONNECTIVITY
52-Position Edge Connectore
ETM JTAG
SYSTEM DEBUG
HAB4
L2 Switch
128-bit AES
SHA-2 Hashing
SECURITY
Timer x 4
RTC
PWM x 8
Watch Dog DMA
STANDARD SYSTEM
U.FL
802.11
a/b/g/n
+ BT4.0
Up to
256 MB
DDR2
Up to
2 GB
NAND
(SLC)
LCD/
Touch
Connector
i.MX28
ARM926EJ-S
454 MHz
16K I
Cache
32K D
Cache
BCH 20-bit
NAND
DDR2
LV-DDR2
mDDR
SPI x 4
i
2
C x 2
UART x 6
MMC+/SD x 4
GPIO
SPI x 4
PC x 2
DC/DC - 4.2V
LDO x 4
Battery Charger
UART x 6
EXT MEMORY I/F
S/PDIFT x
PS x 2
POWER
MANAGEMENT
USER I/F
Touchscreen
LCD Controller
Scaling
Rotation
Color Space
Conversion
Alpha Blending
128KB ROM
128KB SRAM
EXT MEMORY I/FCONNECTIVITY
CONNECTIVITY
AUDIO
WWW.DIGI.COM
DEVELOPMENT KIT CONTENTS
MODULE
NXP i.MX287, up to 454 MHz, 256 MB NAND flash (SLC), 256 MB DDR2,
Dual Ethernet, 802.11a/b/g/n + BT 4.0, dual CAN Bus, on-module LCD + touchscreen connector, JTAG/ETM
DEVELOPMENT BOARD
4 serial ports (2 x RS-232 Tx/RX, 2 x TTL Tx/Rx), 2 FlexCAN (DB9),
VGA connector, external LCD/Touchscreen connectors, user/application connectors,
Ethernet RJ-45 connectors, Wi-Fi/Bluetooth antenna connectors (RP-SMA), MicroSD slot,
USB OTG connector (micro-B), 1 x USB Host (Type A), I2C/SPI/ADC/PWM headers, 1-Wire connector,
Audio: line in/out and headphone in (3.5 mm), user push-buttons, user LEDs,
Digi XBee® module sockets (SMT and through-hole) with antenna connector option,
802.3af (PoE) module socket (PoE module sold separately), JTAG connector,
9-30 VDC power supply, battery connector, power switch
CD/DVD
Digi Embedded Linux with Live DVD support,
Eclipse-based Digi ESP IDE,
Linux and platform specific source code,
Universal boot loader source code (U-Boot),
sample code, documentation
DOCUMENTATION Quick start guide, Digi Embedded Linux users guide, hardware reference manual, development board schematics and BOM
ACCESSORIES
External wall power supply with interchangeable outlet adapters (North America, EU, UK, Australia),
Ethernet cable, antennas and serial cable
PART NUMBERS CC-WMX28-LX
PROCESSOR
PROCESSOR MODELS NXP® i.MX280, i.MX287
SPEED GRADE Up to 454 MHz
CORE TYPE ARM926EJ-S
CACHE MEMORY 16k I-Cache, 32k D-Cache
INTERNAL RAM 128 KB SRAM
INTERNAL ROM (OCOTP) 1,280 Bits
MEMORY
FLASH Up to 2 GB NAND flash
RAM Up to 256 MB DDR2
DEBUG
JTAG Yes
ETM/ETB Yes
OVERVIEW
ConnectCard™ i.MX28 | ConnectCard™ Wi-i.MX28
DIGI JUMPSTART KIT® FOR DIGI EMBEDDED LINUX OVERVIEW
Built on a standard Linux 2.6 kernel distribution, the Digi JumpStart
Kit for Embedded Linux is tailored to the specific needs of embedded
Linux product development and provides an easy-to-use, complete
o-the-shelf embedded development platform. It integrates all
relevant soware components required to build secure network-
enabled products, including extended capabilities such as fast system
startup, secure boot, enterprise-grade Wi-Fi security, Wi-Fi Direct,
Wi-Fi Access Point mode, Bluetooth stack (with HDP), Sun Java SE
for Embedded, HAPI HL7 parser and fully integrated Device Cloud
support for remote device management and web services for cloud
based applications.
The Digi JumpStart Kit for Digi Embedded Linux also provides
Digi ESP™ for Embedded Linux, a fully Linux-hosted Integrated
Development Environment (IDE) based on the open Eclipse™
framework. Ideal for new and powerful enough for experienced
Linux developers, Digi ESP significantly improves the overall
soware design productivity by accelerating and greatly simplifying
driver and application development through a user-friendly and
graphically oriented development environment.
– Complete Linux development platform for embedded systems
– Royalty-free and with optimized 2.6 kernel and services support
– Linux-based Digi ESP IDE for rapid product development
– Full Linux and Digi Board Support Package (BSP) source code
SPECIFICATIONS
WWW.DIGI.COM
POWER MANAGEMENT
POWER MODES
Run, Standby, Deep Sleep
WAKE-UP EVENTS
RTC, GPIO, CAN, USB, Ethernet
AUTO SLOW
Yes
LI-ION BATTERY CHARGER / MONITOR
Yes
CLOCK AND WATCHDOG
REAL-TIME CLOCK
Yes
ALARM
Yes
WATCHDOG
Yes
SECURITY
DATA CO-PROCESSOR (DCP)
128-bit AES encryption; SHA-1 / SHA256 hashing
FUSEBOX (OCOTP)
1280 bits
HIGH-ASSURANCE BOOT (HAB4)
Yes
SECURE BOOT
128-bit AES decryption
PERIPHERALS
UART
Up to 4 channels with bit rates up to 3.25 Mbps (AUART)
Up to 1 channel with bit rate up to 115 kbps (DUART)
CAN BUS
Up to 2 channels, CAN Bus 2.0B, bit rates up to 1 Mbps, 64 message buers (0-8 bytes),
low-power modes with wake-up
SPI
Up to 2, master/slave modes
I2S
Up to 1
I2C
Up to 2 channels, master/slave (7-/10-bit addressing), standard (100 kbps) and fast (400 kbps) mode
SD/SDIO/MMC
Up to 4 ports, 1-/4-/8-bit modes, up to 48 MHz
USB 2.0 HIGH-SPEED
Up to 1 USB 2.0 High-Speed Host (with PHY) ; Up to 1 USB 2.0 OTG port (with PHY)
1-WIRE
Maxim DS2482-100+
PWM
Up to 4
ADC
HSADC: Up to 1 channel, up to 2 Mbps sample rate, 8-/10-/12-bit resolution
LRADC: Up to 6 channels, 12-bit resolution
GPIO
Up to 128 GPIOs, selectable voltage (1.8/3.3V), interrupt capable
DISPLAY
RESOLUTION
800x480 (WVGA)
REFRESH RATE
Up to 60 Hz
COLOR DEPTH
8/16/24 bpp
MODES
RGB/DOTCK/SYSTEM
COLOR SPACE CONVERSION
Yes
SCALING
Yes
ROTATION
Yes
TOUCH SCREEN
TOUCH SCREEN CONTROLLER
4-/5-wire (LRADC)
ETHERNET
PHYSICAL LAYER
10/100Base-T
DATA RATES
10/100 Mbps, auto-sensing
DUPLEX MODE
Full or half duplex, auto-sensing
IEEE 1588
Yes (i.MX287 only)
POWER OVER ETHERNET (802.3AF)
POWER OVER ETHERNET
Development board ready for 802.3af PoE application kit (sold separately)
SPECIFICATIONS
ConnectCard™ i.MX28 | ConnectCard™ Wi-i.MX28
P1-P3P4-P5

CC-WMX-PF47-TK

Mfr. #:
Buy CC-WMX-PF47-TK
Manufacturer:
Digi International
Description:
System-On-Modules - SOM ConnectCard
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet