INDUSTRIAL TEMPERATURE RANGE
4
IDT74LVCH16244A
3.3V CMOS 16-BIT BUFFER/DRIVER WITH 3-STATE OUTPUTS
NOTE:
1. VIH and VIL must be within the min. or max. range shown in the DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE table for the appropriate VCC range.
TA = – 40°C to + 85°C.
OUTPUT DRIVE CHARACTERISTICS
Symbol Parameter Test Conditions
(1)
Min. Max. Unit
V
OH Output HIGH Voltage VCC = 2.3V to 3.6V IOH = – 0.1mA VCC – 0.2 — V
VCC = 2.3V IOH = – 6mA 2 —
VCC = 2.3V IOH = – 12mA 1.7 —
VCC = 2.7V 2.2 —
VCC = 3V 2.4 —
VCC = 3V IOH = – 24mA 2.2 —
VOL Output LOW Voltage VCC = 2.3V to 3.6V IOL = 0.1mA — 0.2 V
VCC = 2.3V IOL = 6mA — 0.4
IOL = 12mA — 0.7
VCC = 2.7V IOL = 12mA — 0.4
VCC = 3V IOL = 24mA — 0.55
OPERATING CHARACTERISTICS, VCC = 3.3V ± 0.3V, TA = 25°C
Symbol Parameter Test Conditions Typical Unit
CPD Power Dissipation Capacitance per Buffer/Driver Outputs enabled CL = 0pF, f = 10Mhz 34 pF
CPD Power Dissipation Capacitance per Buffer/Driver Outputs disabled 3
SWITCHING CHARACTERISTICS
(1)
VCC = 2.7V VCC = 3.3V ± 0.3V
Symbol Parameter Min. Max. Min. Max. Unit
tPLH Propagation Delay — 4.7 1.1 4.1 ns
tPHL xAx to xYx
tPZH Output Enable Time — 5.8 1 4.6 ns
tPZL xOE to xYx
tPHZ Output Disable Time — 6.2 1.8 5.8 ns
tPLZ xOE to xYx
tSK(o) Output Skew
(2)
—— — 1ns
NOTES:
1. See TEST CIRCUITS AND WAVEFORMS. TA = – 40°C to + 85°C.
2. Skew between any two outputs of the same package and switching in the same direction.