MP5077 – 5.5V, 7A, LOW RDSON LOAD SWITCH WITH PROGRAMMABLE CURRENT LIMIT
MP5077 Rev. 1.01 www.MonolithicPower.com 4
6/23/2014 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
ELECTRICAL CHARACTERISTICS
V
IN
= 3.6V, V
CC
= 3.6V, T
A
= 25°C, unless otherwise noted.
Parameters Symbol Condition Min Typ Max Units
Input and Supply Voltage Range
Input Voltage V
IN
0.5 5.5 V
Supply Voltage V
CC
3 5.5 V
Supply Current
Off State Leakage Current I
OFF
V
IN
=5V, EN=0 1 µA
V
CC
Standby Current I
STBY
V
CC
=5V, EN=0 0.1 1
µA
V
CC
=5V, Enable, No load 220 330
Power FET
ON Resistance R
DSON
V
CC
=5.0V 10
m
V
CC
=3.3V 12
Thermal Shutdown and Recovery
Shutdown Temperature
(5)
T
STD
155 °C
Hysteresis
(5)
T
HYS
30 °C
Unde
r
V
oltage Protection
V
CC
Under Voltage Lockout
Threshold
V
CC_UVLO
UVLO Rising Threshold 2.6 2.8 V
UVLO Hysteresis V
UVLOHYS
200 mV
Soft Start
SS pull-up current I
SS
9 µA
Enable
EN Rising Threshold V
ENH
1.3 1.5 1.7 V
EN Hysteresis V
EN HYS
400 mV
Current Limit
Current limit I
OUT
R
LIMIT=50k, ramp lout
record peak current limit
1.54 1.64 1.74 A
Discharge Resistance
Discharge Resistance R
DIS
200
Notes:
5) Guarantee by Characterization-Not Production tested.
MP5077 – 5.5V, 7A, LOW RDSON LOAD SWITCH WITH PROGRAMMABLE CURRENT LIMIT
MP5077 Rev. 1.01 www.MonolithicPower.com 5
6/23/2014 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
PIN FUNCTIONS
Pin # Name Description
1 EN Enable Input. Pulling this pin below the specified threshold shuts the chip down.
2 GND Ground.
3 VCC Supply Voltage to the Control Circuitry.
4 ILIM
Output Current Limit Configure. Place a resistor to ground to set the overload current limit
level.
5 SS
Soft start pin. An external capacitor connected to this pin sets the slew rate of the output
voltage soft start period.
6, 11 VIN Input Power Supply.
7, 8, 9, 10 VOUT Output to the load.
12 NC Factory Test Pin. Keep it floating.
MP5077 – 5.5V, 7A, LOW RDSON LOAD SWITCH WITH PROGRAMMABLE CURRENT LIMIT
MP5077 Rev. 1.01 www.MonolithicPower.com 6
6/23/2014 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
TYPICAL PERFORMANCE CHARACTERISTICS
V
IN
= 3.6V, V
CC
= 3.6V, EN=2.5V, R
LIM
= 10.5k, T
A
= 25°C, unless otherwise noted.

MP5077GG-Z

Mfr. #:
Manufacturer:
Monolithic Power Systems (MPS)
Description:
Power Switch ICs - Power Distribution 5.5V, 7.5A, Switch w/ Current Limit
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet