https://www.phoenixcontact.com/pi/products/2813486
08/19/2018Page2/4
Current transducers-MCR-SL-S-100-I-LP-2813486
Technical data
Input data
Setting range for max. input current 0 A ... 100 A
Overload capacity Depending on laid conductor
Surge strength Depending on through connected conductor
Frequency measuring range 30 Hz ... 6000 Hz
Connection method Clamp-on cable design, diameter 18.5 mm
Output data
Output name Current output
Current output signal 4 mA ... 20 mA
Max. output current < 25 mA
Load/output load current output
(U
B
- 12 V) x 350 / 12 A
Switching output
Output name No switching output
Power supply
Supply voltage range 20 V DC ... 30 V DC
Connection data
Connection method Pluggable screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 14
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Stripping length 8 mm
Screw thread M3
General
Maximum transmission error < 1 % (of final value)
Maximum temperature coefficient < 0.025 %/K
Step response (10-90%) < 340 ms
Overvoltage category III
Degree of pollution 2
Rated insulation voltage 300 V AC (to earth)
Test voltage input/output 5 kV (50 Hz, 1 min.)
Color green
Housing material Polyamide PA non-reinforced
Mounting position any
Conformance CE-compliant
UL, USA/Canada UL/C-UL listed UL 508
Torque 0.5 Nm ... 0.6 Nm (4,4...5,31lbf-in.)