OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

BLP55-1005

P1-P3P4-P6
BLP55 AC-DC Series Data Sheet
55 Watts
103354D Rev AB1, 06-FEB-09 Page 1 of 6 www.power-one.com
Features
• RoHS lead-free solder and lead-solder-exempted
products are available
• Industry-standard 3” x 5” footprint
• Main output remote sense
• CE marked to Low Voltage Directive
• Compliance to EN61000-4-2/-3/-4/-5/-6/-8
The BLP55 Series’ economical and compact construction provides single or three-output ac-dc power conversion to
meet the requirements of networking and data communications systems, as well as commercial and industrial
configurations.
The BLP55 is rated for convection, as well as forced-air cooling. Full output power is available with external
forced-air cooling. Other features include main-output remote sense and an internal EMI filter.
Description
Ordering Information:
OPTIONS SUFFIXES TO ADD TO PART NUMBER
RoHS lead solder exempt No RoHS character required.
RoHS compliant for all 6 substances Add “G” as the last character of the part number.
Single Output Model Selection
MODEL NOMINAL OUTPUT MIN-MAXIMUM OUTPUT MIN-MAXIMUM OUTPUT PEAK OUTPUT TOTAL RIPPLE & NOISE
VOLTAGE (VDC) CURRENT, CONVECTION CURRENT
1
CURRENT
2
REGULATION %
3
%p-p
4
BLP55-1005 5V 0 to 8A 0 to 11A 12A ±2 1
BLP55-1012 12V 0 to 3.3A 0 to 4.5A 5A ±2 1
BLP55-1024 24V 0 to 1.6A 0 to 2.3A 2.5A ±2 1
Triple Output Model Selection
MODEL NOMINAL OUTPUT MIN-MAXIMUM OUTPUT MIN-MAXIMUM OUTPUT PEAK OUTPUT TOTAL RIPPLE & NOISE
VOLTAGE (VDC) CURRENT, CONVECTION CURRENT
1
CURRENT
2
REGULATION %
3
%p-p
4
+5V 0.4 to 4A 0.5 to 5A 7A ±2 1
BLP55-3000 +12V 0.2 to 2A 0.2 to 2.5A 4A ±5 1
-12V 0.0 to 0.5A 0.0 to 0.7A 1 ±5 1
+3.3V 0.5 to 4A 0.5 to 5A 7A ±2.5 1
BLP55-3300 +5V 0.0 to 2A 0.0 to 2.5A 4A ±2.5 1
+12V 0.0 to 0.5A 0.0 to 0.7A 1A ±5 1
NOTES:
1
10 CFM or 150 LFM (average measurement of six equally-distanced points through a 3.5” x 1.6” cross-sectional area) with power supply mounted
on 0.25” standoffs. Recommended airflow direction is from the AC side to the DC side.
2
Peak current duration for less than 30 Sec with a maximum duty cycle of 10%.
3
At 25 °C ambient including voltage set point tolerance, line, and load regulation.
4
Maximum peak-to-peak noise expressed as a percentage of output voltage, 20 MHz bandwidth, and bypass capacitors of 10 μF and 0.1 μF.
BLP55 AC-DC Series Data Sheet
55 Watts
103354D Rev AB1, 06-FEB-09 Page 2 of 6 www.power-one.com
Input Specifications
PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS
Input Voltage - AC Single-phase continuous input range. 85 100-250 264 VAC
Input Voltage - DC Consult factory.
Input Frequency AC input. 47 50/60 63 Hz
Input Current At 115 VAC input. 1A
RMS
Inrush Surge Current Internally limited. Vin = 115 VAC, Max Power, 25 °C. 18 A
PK
Internally limited. Vin = 230VAC, Max Power, 25 °C. 36 A
PK
Input Fuse Internally located AC input line fuse rated at F, 250 V, 3.15 A.
Efficiency At Max Power, -3300 60% nominal. 70 %
Output Specifications
PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS
Output Power With convection cooling (-3300 25 W). See Model Selection Table 40
Watts
With forced-air cooling (-3300 41 W). See Model Selection Table 55
Output DC Adjustability: Adjustability of Vo1 (Vo2/Vo3 are not adjustable). -5%, +10% Of Nom
Overshoot 5%
Load Transient Vo1, Vo2, or Vo3 deviation due to a 50 to 100% load change ±3 %
at a rate of 1A/µs.
Turn-On Time from AC ON Time required for output voltage to reach within regulation after initial application 1.5 Sec
of AC input.
Turn-On Delay Time required for output voltage to rise from 10% to 90%. 20 ms
Hold-Up Time At 40 W, 115 VAC 20 ms
Remote Sense Total compensation for cable losses on Vo1. 500 mV
(Remote Sense is not available for Vo2 or Vo3)
Interface Signals and Internal Protection
PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS
Overvoltage Protection Main output. 3.3V: 3.8 4.5
5V: 5.7 6.8
12V: 13.8 16.2 V
24V: 27.6 32.4
48V: 52.8 56.4
Short Circuit Protection Fully-protected against output short circuit.
BLP55 AC-DC Series Data Sheet
55 Watts
103354D Rev AB1, 06-FEB-09 Page 3 of 6 www.power-one.com
Environmental Specifications
PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS
Altitude Operating. 10k ASL Ft.
Non-Operating. 50k ASL Ft.
Operating Temperature 0 °C to 70 °C with linear derating to 50% above 50 °C. Unit will start up at 0 25 70 °C
-20 °C but will not meet all published specifications.
Storage Temperature -40 85 °C
Forced-Air Cooling Forced-air cooling of 150 LFM at 10 CFM is required for full output power.
1
(See Model Selection Table).
Convection Cooling When unit is mounted horizontally with free-air convection. 40 W
(See Model Selection Table).
Temperature Coefficient 0 °C to 70 °C (after 15-minute warm-up). ±0.02 %/°C
Relative Humidity Non-Condensing. 5 95 %RH
Shock Operating: half-sine 11 ±3ms, 3 axis. 15
G
Non-operating: half-sine 11±3ms, 3 axis. 40
Vibration Operating: Random vibration, 5-500 Hz (10 minutes each axis). 2.4 Grms
Non-operating: Random vibration, 5-500 Hz (10 minutes each axis). 6.0 Grms
NOTES:
1
10 CFM or 150 LFM (average measurement of six equally-distanced points through a 3.5” x 1.6” cross-sectional area) with power supply mounted
on 0.25” standoffs. Recommended airflow direction is from the AC side to the DC side.
Safety, Regulatory, and EMI Specifications
PARAMETER CONDITIONS/DESCRIPTION MIN NOM MAX UNITS
Agency Approvals UL60950-1/CSA 22.2 No. 60950-1-03.
EN 60950-1/IEC 60950-1.
CB Approval.
CE Mark for LVD.
Ground Continuity 40 A
Dielectric Withstand Voltage Input-to-Ground (Basic). 1500 VAC
2121 VDC
Input-to-Ouput (Reinforced). The primary to secondary test is not performed 3000 VAC
on completed assemblies. 4242 VDC
Output-to-Ground (Functional). 500 VDC
Electromagnetic Interference FCC Part 15. Conducted: B
Class
CISPR 22 and CISPR 11. Conducted: B
ESD Per EN61000-4-2, level 3.
Flicker Per EN61000-3-3.
Radiated Susceptibility Per EN61000-4-3, level 3. 3 V/m
EFT/Burst Per EN61000-4-4, level 3. 1 kV
Input Transient Protection Per EN61000-4-5, class 3. Line-to-Line: 1
kV
Line-to-Ground: 2
RF Immunity Per EN61000-4-6, level 3. 3 V/m
Magnetic Fields Per EN61000-4-8. 1 A/m
Leakage Current Per EN60950. BLP55-1XXX At 264 VAC: 0.48
mA
BLP55-3XXX AT 264 VAC: 0.72
P1-P3P4-P6

BLP55-1005

Mfr. #:
Buy BLP55-1005
Manufacturer:
Bel
Description:
AC/DC CONVERTER 5V 55W
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet