THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
*
*
DO NOT
SCALE FROM
THIS PRINT
HSEC8-1XX-XX-X-RA-XX-XX
-BL: BOARD LOCK OPTION
(USE HSEC8-XXX-01-RA-BL)
(AVAILABLE IN -09, -13, *-20, -25,
-40, -49, -50, -60 POS ONLY,
SEE FIG 2, SHT 3)
-L2: ECDP LATCHING OPTION
(USE HSEC8-XXX-01-RA-L2)
(AVAILABLE IN -09, -13, -25, -49
POS ONLY, SEE FIG 3, SHT 3)
OPTION
-TR: TAPE & REEL
PACKAGING
PLATING SPECIFICATION
-01: 1.57mm [.062] THICK CARD
CARD THICKNESS
-RA: RIGHT ANGLE
(USE HSEC8-XXX-01-RA-XX)
ROW SPECIFICATION
-10, -20, -30 (ONE BANK OPTIONS)
-09, -13, -25, -40, -49, -50, -60
(TWO BANK OPTIONS)
No OF POSITIONS
-L: 10µ" SELECTIVE GOLD ON
CONTACT AREA, TIN TAIL
-S: 30µ" SELECTIVE GOLD ON
CONTACT AREA, TIN TAIL
(* = NOT TOOLED)
"C"
REF
"B"
REF
1.75
REF
.069
5.20 .205
REF
3.00 .118
REF
0.25 .010
REF (TYP)
"D"
REF
"J"±0.100[.0039]
("H" SPACES @ 0.800)
(SEE NOTE 12)
4.00 .158
(SEE NOTE 12)
2.00 .079
REF
"G" REF
"A"
±0.100
[.0039]
(SEE NOTE 12)
0.800
±0.100
(TYP)
.0315
±.0039
(TOL NON ACCUM)
(SEE NOTE 12)
"K"
±0.10
(EITHER DIRECTION)
2
MAX SWAY
1.100
REF
.0433
"A"
"A"
POSITION #1
INDICATOR
01
02
49
50
C
C
C
C
C
9.30 .366
REF
1.32
REF
.052
12.05 .474
REF
3.100
±0.100
[.0039]
(SEE NOTE 12)
0.800
±0.100
(TYP)
.0315
±.0039
(TOL NON ACCUM)
(SEE NOTE 12)
"E"
±0.100
[.0039]
(SEE NOTE 12)
1.32 .052
REF
1.10 .043
REF
"F"
REF
C
C
C
SOME CENTER FEATURES
NOT SHOWN FOR CLARITY
SOME CENTER FEATURES
NOT SHOWN FOR CLARITY
C
FIG 1
HSEC8-125-01-X-RA SHOWN
(SOME CENTER FEATURES NOT
SHOWN FOR CLARITY)
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
DECIMALS ANGLES
X.X:
0.3 [.01] 2
X.XX:
0.13 [.005]
X.XXX:
0.051 [.0020]
MATERIAL:
0.8MM HIGH SPEED ASSEMBLY
BY:
HSEC8-1XX-XX-X-RA-XX-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
ROY LUO
11/05/2008
4
1
SHEET SCALE: 2.5:1
INSULATOR: LCP UL94V-0, COLOR: BLACK
CONTACT : BeCu
WELD TAB: BRASS
F:\DWG\MISC\MKTG\HSEC8-1XX-XX-X-RA-XX-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MAXIMUM BURR ALLOWANCE: 0.05[.002].
3. MINIMUM RETENTION FORCE: 2.22N[.500 LB] FOR PINS AND WELD TAB.
4. MEASURE AT BEND TANGENCY.
5. NOTE DELETED.
6. PARTS TO BE PACKAGED IN TRAY, UNLESS -TR OPTION IS SPECIFIED.
7. NOTE DELETED.
8. DIMENSIONS MUST BE MEASURED ON 4 CONSECUTIVE PINS ON EACH END OF THE
CONNECTOR.
9. NOTE DELETED.
10. NOTE DELETED.
11. LTC-XX TO BE IN CLOSED POSITION AS SHOWN.
12. MEASURE BOTH TOP AND BOTTOM ROWS.
13. NOTE DELETED.
14. SEE CO-AU-WI-3163-M DOCUMENT FOR CRITICAL MEASUREMENT SPECIAL INSTRUCTIONS.
15. SEE SUB-C-272-XX-X FOR PROCESS DESCRIPTION AND REQUIREMENTS.
REVISION AJ
