ISL79985IRZ

1
DATA SHORT
To request the full datasheet, please visit: ISL79985 or ISL79986
4-Channel Differential Input Video Decoder with
MIPI-CSI2/BT.656 Output for Around View Applications
ISL79985, ISL79986
The ISL79985, ISL79986 integrates four high quality
NTSC/PAL/SECAM video decoders that convert the analog
composite video signal to digital component YCbCr data for
automotive applications. Each channel contains a 10-bit ADC
that supports single-ended, differential, and pseudo
differential composite video inputs, proprietary clamp and
gain controllers, thus, utilizes a 4H-comb filter for separating
luminance and chrominance to reduce cross noise artifacts.
Integrated short-to-battery and short-to-ground detection,
advanced image enhancement capabilities such as the
programmable Automatic Contrast Adjustment (ACA), and the
MIPI-CSI2/ITU-R BT.656 output interface make the ISL79985,
ISL79986 an ideal solution for demanding automotive around
view applications.
Applications
•Automotive surround view
Features
Analog Video Decoder
Software selectable analog input control allows for
combinations of single-ended CVBS and differential CVBS
Integrated four video analog anti-aliasing filters and 10-bit
CMOS ADCs with differential and single-ended inputs
Fully programmable static gain or automatic gain control for
the Y-channel
Programmable white peak control for the Y-channel
4-H adaptive comb filter Y/C separation
PAL delay line for color phase error correction
Digital subcarrier PLL for accurate color decoding
Digital horizontal PLL for synchronization processing and
pixel sampling
Advanced synchronization processing and sync detection for
handling non-standard and weak signal
Automatic color control and color killer
Chroma IF compensation
Programmable output cropping
FIGURE 1. ISL79985 BLOCK DIAGRAM
ADC
AA
FILTER
AGC
ADC
AA
FILTER
AGC
ADC
AA
FILTER
AGC
ADC
AA
FILTER
AGC
AFE
SHORT
DETECTION
LINE INTERLEAVING ENGINE
FIFO CONTROL
MIPI CSI
AND DPHY
I
2
C INTERFACE
OSC
PLL
XTI
XTO
SCLK
SDAT
REGFILE
IRQ
PD
RSTB
4H COMB
VIDEO DEC
ACA
CSC
DEC_CH
REGFILE
4H COMB
VIDEO DEC
ACA
CSC
DEC_CH
REGFILE
4H COMB
VIDEO DEC
ACA
CSC
DEC_CH
REGFILE
4H COMB
VIDEO DEC
ACA
CSC
DEC_CH
REGFILE
CLKO/ MPP[1]
MPP[0]
MIPIC
MIPID0
MIPID1
VIN1A
VIN1B
DIAG1
VIN2A
VIN2B
DIAG2
VIN3A
VIN3B
DIAG3
VIN4A
VIN4B
DIAG4
June 24, 2016
FN8851.2
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Copyright Intersil Americas LLC 2016. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
ISL79985, ISL79986
2
FN8851.2
June 24, 2016
Submit Document Feedback
Intersil products are manufactured, assembled and tested utilizing ISO9001 or TS16949 quality systems as applicable
noted in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
For additional products, see www.intersil.com/en/products.html
Features (Continued)
Video Processing
Automatic Contrast Adjustment (ACA)
Programmable hue, brightness, saturation, contrast and
sharpness.
Image enhancement with peaking and CTI
MIPI Output (ISL79985)
MIPI CSI-2 Version 1.1 compliant unidirectional output format
Standard virtual channel support
One or two data lanes
YUV422 or RGB565 output format
Digital Output (ISL79986)
Supports standard ITU-R BT.656 format or time multiplexed
output with 27/54/108MHz
Output voltage 1.8V to 3.3V
Miscellaneous
•Low power consumption
Power save and power-down mode
•Short-to-battery detection
•Short-to-ground detection
2-wire MPU serial bus interface
Single 27MHz crystal for all operations
1.2V/3.3 V power supply
48 Ld QFN package
AEC-Q100
qualified
FIGURE 2. ISL79986 BLOCK DIAGRAM
ADC
AA
FILTER
AGC
ADC
AA
FILTER
AGC
ADC
AA
FILTER
AGC
ADC
AA
FILTER
AGC
AFE
SHORT
DETECTION
LINE INTERLEAVING ENGINE
FIFO CONTROL
BT 656
I
2
C
INTERFACE
OSC
PLL
XTI
XTO
SCLK
SDAT
REGFILE
IRQ
PD
RSTB
4H COMB
VIDEO DEC
ACA
CSC
DEC_CH
REGFILE
4H COMB
VIDEO DEC
ACA
CSC
DEC_CH
REGFILE
4H COMB
VIDEO DEC
ACA
CSC
DEC_CH
REGFILE
4H COMB
VIDEO DEC
ACA
CSC
DEC_CH
REGFILE
VIN1A
VIN1B
DIAG1
VIN2A
VIN2B
DIAG2
VIN3A
VIN3B
DIAG3
VIN4A
VIN4B
DIAG4
CLKO/ MPP[1]
MPP[0]
VD[7:0]

ISL79985IRZ

Mfr. #:
Manufacturer:
Renesas / Intersil
Description:
Video ICs ISL79985 Commercial oder with MIPI-CSI2
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet