AT25SF161-SHDHR-T Datasheet AT25SF161-SHDHR-T, AT25SF161-SSHDHR-T | P1-P3

DS-25SF161–046B–2/2016

High Temperature Operation (125°C)

This data sheet addendum is to be used in conjunction with the existing AT25SF161

datasheet specifications. The Adesto AT25SF161 16Mbit Serial Flash devices will

operate @ 125°C with the following datasheet caveats. All other parameters will meet

the existing datasheet specifications.

The ordering code suffix (CAN# Code) 'HR' or ‘HT’ must be used to ensure correct

operation at this extended temperature range. Adesto will not modify and republish the

current datasheet to reflect the CAN# 'HR' ordering code or the above caveats.The

standard

AT25SF161 datasheet is available at http://www.adestotech.com.

AT25SF161

16-Mbit, 2.5V Minimum

SPI Serial Flash Memory with Dual-I/O and Quad-I/O Support

DATASHEET (ADDENDUM)

1. Electrical and Performance Specifications

1.2 DC Characteristics

1.1 DC and AC Operating Range

AT25SF161-xxxHR

Operating Temperature -40°C to +125°C

Symbol Parameter Condition

2.5V to 3.6V

UnitsMin Typ Max

DPD

Deep Power-Down Current CS, HOLD, WP = V

(1)

1. Industrial temperature limit is 5µA.

µA

Standby Current CS, HOLD, WP = V

(2)

2. Industrial temperature limit is 25µA.

µA

1.3 Program and Erase Characteristics

1.4 Endurance

1.5 Data Retention

2. Ordering Code

2.1 Ordering Code Detail

Symbol Parameter

2.5V to 3.6V

Min Typ Max Units

(1)

1. Maximum values indicate worst-case performance after 10,000 erase/program cycles.

Page Program Time (256 Bytes) 1.5 4 ms

CHPE

(1) (2)

2. Not 100% tested (value guaranteed by design and characterization).

Chip Erase Time 12 25 sec

AT25SF161-xxxHR

Endurance (Maximum) 10,000 cycles

AT25SF161-xxxHR/

Retention

(1)

1. Represents typical value based on equivalent operation derived from Arrhenius calculations under post cycling high temperature conditions; not indicative of

performance at constant device operation life at 125°C.

Ordering Code

(1)

1. The shipping carrier option code is not marked on the devices.

Package Operating Voltage

Max. Freq.

(MHz)

Operation Range

AT25SF161-SHDHR-T

8S2

2.5V to 3.6V 85MHz

Extended

(-40°C to +125°C)

AT25SF161-SHDHR-B

AT25SF161-SSHDHR-T

8S1

AT25SF161-SSHDHR-B

Package Type

8S1 8-lead, 0.150" Wide, Plastic Gull Wing Small Outline Package (JEDEC SOIC)

8S2 8-lead, 0.208" Wide, Plastic Gull Wing Small Outline Package (EIAJ SOIC)

Corporate Office

California | USA

Adesto Headquarters

1250 Borregas Avenue

Sunnyvale, CA 94089

Phone: (+1) 408.400.0578

Email: contact@adestotech.com

Disclaimer: Adesto Technologies Corporation makes no warranty for the use of its products, other than those expressly contained in the Company's standard warranty which is detailed in Adesto's Terms

and Conditions located on the Company's web site. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications

detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Adesto are granted by the

Company in connection with the sale of Adesto products, expressly or by implication. Adesto's products are not authorized for use as critical components in life support devices or systems.

1. Revision History

Revision Level – Release Date History

A – November 2015 Initial release.

B – February 2016

Removed AT25SF161-DWF-HT product option. Updated Endurance and Data

Retention specifications.

P1-P3

AT25SF161-SHDHR-T

Mfr. #:

Buy AT25SF161-SHDHR-T

Manufacturer:

Adesto Technologies

Description:

NOR Flash SPI FLASH H-TMP 2.5V 16MbDual-I/O,Quad-IO

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

AT25SF161-SHDHR-T

AT25SF161-SHDHR-T

Products related to this Datasheet