Data Sheet OP27
Rev. H | Page 7 of 21
ABSOLUTE MAXIMUM RATINGS
Table 5.
Parameter Rating
Supply Voltage ±22 V
Input Voltage
1
±22 V
Output Short-Circuit Duration Indefinite
Differential Input Voltage
2
±0.7 V
Differential Input Current
2
±25 mA
Storage Temperature Range −65°C to +150°C
Operating Temperature Range
OP27E (Z) −25°C to +85°C
OP27E (P) 0°C to 70°C
OP27G (P, S, J, Z) −40°C to +85°C
Lead Temperature Range (Soldering, 60 sec) 300°C
1
For supply voltages less than ±22 V, the absolute maximum input voltage is
equal to the supply voltage.
2
The inputs of the OP27 are protected by back-to-back diodes. Current
limiting resistors are not used in order to achieve low noise. If differential
input voltage exceeds ±0.7 V, the input current should be limited to 25 mA.
Stresses at or above those listed under Absolute Maximum
Ratings may cause permanent damage to the product. This is a
stress rating only; functional operation of the product at these
or any other conditions above those indicated in the operational
section of this specification is not implied. Operation beyond
the maximum operating conditions for extended periods may
affect product reliability.
THERMAL RESISTANCE
θ
JA
is specified for the worst-case conditions, that is, θ
JA
is
specified for device in socket for TO-99, CERDIP, and PDIP
packages; θ
JA
is specified for device soldered to printed circuit
board for SOIC package.
Absolute maximum ratings apply to both dice and packaged
parts, unless otherwise noted.
Table 6.
Package Type θ
JA
θ
JC
Unit
8-Lead Metal Can (TO-99) (J) 150 18 °C/W
8-Lead CERDIP (Z) 148 16 °C/W
8-Lead PDIP (P) 103 43 °C/W
8-Lead SOIC_N (S) 158 43 °C/W
ESD CAUTION