DocID17207 Rev 3 5/7
STPS200170TV1Y Package information
7
2 Package information
• Epoxy meets UL94, V0
• Cooling method: by conduction (C)
• Recommended torque value: 1.3 N·m
• Maximum torque value: 1.5 N·m
• Mandatory. Do not use any screws other than the screws soled with the package for
connecting the 4 nuts in the front of the ISOTOP package.
STMicroelectronics strongly recommend the use of the screws delivered with this product.
The use of anyother screws is entirely at the user’s own risk and will invalidate the warranty.
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
®
specifications, grade definitions and product status are available at: www.st.com
.
ECOPACK
®
is an ST trademark.
Table 5. ISOTOP package dimensions
Ref.
Dimensions
Millimeters Inches
Min. Max. Min. Max.
A 11.80 12.20 0.465 0.480
A1 8.90 9.10 0.350 0.358
B 7.8 8.20 0.307 0.323
C 0.75 0.85 0.030 0.033
C2 1.95 2.05 0.077 0.081
D 37.80 38.20 1.488 1.504
D1 31.50 31.70 1.240 1.248
E 25.15 25.50 0.990 1.004
E1 23.85 24.15 0.939 0.951
E2 24.80 typ. 0.976 typ.
G 14.90 15.10 0.587 0.594
G1 12.60 12.80 0.496 0.504
G2 3.50 4.30 0.138 0.169
F 4.10 4.30 0.161 0.169
F1 4.60 5.00 0.181 0.197
P 4.00 4.30 0.157 0.69
P1 4.00 4.40 0.157 0.173
S 30.10 30.30 1.185 1.193
F1 F
D1
G
D
S
B
E1
G1
ØP
P1
E
E2
G2
C
C2
A1
A
