Spec. No.
Subject
Metal Film(Thin Film) Chip Resistors
PRODUCT SPECIFICATION FOR INFORMATION
151-SRA-E102R
Part No.
E R A 3
10
－
9
Panasonic Electronic Devices Co., Ltd.
<Test Methods>
14.3.2 Quantity in Taping: 5000 pcs. /reel
14.3.3 Tape packaging
(1) Resistance side shall be facing upward.
(2) Chip resistor shall not be sticking to top tape and bottom tape.
(3) Chip resistor shall be easy to take out from carrier tape and chip hole or sprocket hole
shall not have flash and break.
14.4 Outer Packaging
Quantity: 20 reels (Max. 100,000pcs.)
* When taping shall not reach Max. or quantity, the remaining empty space shall be buried
with buffer material.
* When the quantity shall be few, alternative packaging methods may be used. No problem
must occur during the exportation of the product.
14.5 Marking (Label)
Items listed below shall be displayed.
(1) Side of reel (Marking shall be on one side)
1)Part name, 2)Part number, 3)Quantity, 4)Lot number, 5)Maker name, 6) Production country
(2)Packaging box
1)Customer name, 2)Part name, 3)Part number, 4)Customer part number, 5)Quantity.
6)Maker name, 7)Production country
Peeling directionCarrier tape
Top tape
10
o
Tape
Marking
