For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
LOW NOISE AMPLIFIERS - SMT
7
HMC392LC4
v04.0514
GaAs MMIC LOW NOISE
AMPLIFIER, 3.5 - 7.0 GHz
Evaluation PCB
Item Description
J1, J2 SMA
J3 - J4 DC Pin
C1 100 pF capacitor, 0402 Pkg..
C2 1,000 pF Capacitor, 0603 Pkg..
C3 2.2µF Capacitor, Tantalum
U1 HMC392LC4 Amplier
PCB
[2]
117858 Evaluation PCB
[1] Reference this number when ordering complete evlaution PCB
[2] Circuit Board Material: Rogers 4350.
List of Materials for Evaluation PCB 117490
[1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appro-
priate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
