K2501GRP

334
Revised: August 29, 2008
©2008 Littelfuse, Inc.
Teccor
®
brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Multipulse™ SIDACs
Kxxx1G Series
Soldering Parameters
Reflow Condition Pb – Free assembly
Pre Heat
- Temperature Min (T
s(min)
) 150°C
- Temperature Max (T
s(max)
) 200°C
- Time (min to max) (t
s
) 60 – 180 secs
Average ramp up rate (Liquidus Temp)
(T
L
) to peak
5°C/second max
T
S(max)
to T
L
- Ramp-up Rate 5°C/second max
Reflow
- Temperature (T
L
) (Liquidus) 217°C
- Temperature (t
L
) 60 – 150 seconds
Peak Temperature (T
P
) 260
+0/-5
°C
Time within 5°C of actual peak
Temperature (t
p
)
20 – 40 seconds
Ramp-down Rate 5°C/second max
Time 25°C to peak Temperature (T
P
) 8 minutes Max.
Do not exceed 280°C
Note: With proper component selection, this circuit will produce three pulses for ignition of
metal halide lamp that requires a minimum of three pulses at 4kV magnitude and >1uSec
duration each at a minimum repetition rate of 3.3kHz.
Ballast
Kxxx1G
220 V / 240 V
50 / 60 Hz
Metal
Halide
Lamp
H.V.
Step-up
Transformer
0.1-0.15 μF
0.22- 0.33μF
5 - 6μH
5.6K- 8.2K
5W
Figure 10: Typical Metal Halide Ignitor Circuit
Time
Temperature
T
P
T
L
T
S(max)
T
S(min)
25
t
P
t
L
t
S
time to peak temperature
Preheat
P
reheat
Ramp-upRamp-up
Ramp-down
R
am
p
-
do
335
©2008 Littelfuse, Inc.
Revised: August 29, 2008
Teccor
®
brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
335
©2008 Littelfuse, Inc.
Teccor
®
brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Kxxx1G Series
Multipulse™ SIDACs
Multipulse
TM
SIDACs
L
L
G
D
B
Physical Specifications Reliability/Environmental Tests
Test
Specifications and Conditions
High Temperature
Voltage Blocking
MIL-STD-750: Method 1040, Condition
A Rated V
DRM
(VAC-peak), 125°C, 1008
hours
Temperature Cycling
MIL-STD-750: Method 1051, 100 cycles;
-40°C to 150°C, 15-minute dwell time
Temperature /
Humidity
EIA/JEDEC: JESD22-A101
1008 hours; 160V - DC: 85°C;
85% relative humidity
High Temp Storage
MIL-STD-750: Method 1031
150°C, 1008 hours
Low-Temp Storage -40°C, 1008 hours
Thermal Shock
MIL-STD-750: Method 1056
10 cycles; 0°C to 100°C; 5-minute dwell-
time at each temperature; 10-sec (max)
transfer time between temperature
Autoclave
EIA/JEDEC: JESD22-A102
168 hours (121°C at 2 ATMs) and
100% RH
Resistance to
Solder Heat
MIL-STD-750: Method 2031
260°C, 10 seconds
Solderability ANSI/J-STD-002: Category 3, Test A
Repetitive Surge
Life Testing
Multi firings per half cycle at 60Hz in
application circuit for 168 hours minimum
Terminal Finish 100% Matte Tin Plated
Body Material
UL recognized epoxy meeting flammability
classification 94V-0
Lead Material Copper Alloy
Design Considerations
Careful selection of the correct device for the applications
operating parameters and environment will go a long
way toward extending the operating life of the Thyristor.
Overheating and surge currents are the main killers of
SIDACs. Correct mounting, soldering, and forming of the
leads also help protect against component damage.
Dimensions — DO-15 (G Package)
Dimension
Inches Millimeters
Max Max Min Max
B 0.028 0.034 0.711 0.864
D 0.120 0.140 3.048 3.556
G 0.235 0.270 5.969 6.858
L 1.000 25.400
Package Weight / unit (mg)
DO-15 385
Product Selector
Part Number
Switching Voltage Range Blocking Voltage
Packages
V
BO
Minimum V
BO
Maximum V
DRM
K2201G 200V 230V 180V DO-15
K2401G 220V 250V 190V DO-15
K2501G 240V 280V 200V DO-15
K3601G 340V 380V 270V DO-15
336
Revised: August 29, 2008
©2008 Littelfuse, Inc.
Teccor
®
brand Thyristors
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Specifications are subject to change without notice.
Please refer to http://www.littelfuse.com for current information.
Multipulse™ SIDACs
Kxxx1G Series
Part Numbering System
Part Marking System
K 220 1
G
RP
SERIES
K: Sidac
VOLTAGE
220: 200 to 230V
240: 220 to 250V
250: 240 to 280V
360: 340 to 380V
CIRCUIT FUNCTION
1: Multipulse
DEVICE PACKAGE
G: DO-15
PACKAGING OPTIONS
Blank: Bulk
RP: Tape and Reel
®
DO-15 Embossed Carrier RP Specifications
3.15 (80.0) TYP
DO-15
Dimensions
are in inches
(and millimeters).
Direction of Feed
0.252
(6.4)
0.898
(22.8)
0.197
(5.0)
2.063
(52.4)
10.0 - 14.0
(254.0 - 356.0)
Meets all EIA RS-29-6 Standards
Packing Options
Part Number Package Packing Mode Base Quantity
Kxxx1G
DO-15
Bulk 1000
Kxxx1GRP Tape & Reel 5000
Note: xxx = voltage

K2501GRP

Mfr. #:
Manufacturer:
Littelfuse
Description:
Sidacs MP SIDAC 250V DO15
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union