SPEC NO: DSAD1042 REV NO: V.12 DATE: JUN/01/2007 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203000624
Selection Guide
Notes:
1
. =1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2
. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Angle [1]
Min. Typ. 2=1/2
APA3010SGC Super Bright Green (GaP) WATER CLEAR 4 15
120
°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
Cpeak Peak Wavelength Super Bright Green 565 nm I
F=20mA
CD [1] Dominant Wavelength Super Bright Green 568 nm I
F=20mA
IC1/2 Spectral Line Half-width Super Bright Green 30 nm I
F=20mA
C Capacitance Super Bright Green 15 pF V
F=0V;f=1MHz
V
F [2] Forward Voltage Super Bright Green 2.2 2.5 V IF=20mA
I
R Reverse Current Super Bright Green 10 uA VR=5V
Parameter Super Bright Green Units
Power dissipation 62.5 mW
DC Forward Current 25 mA
Peak Forward Current [1] 140 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
